Basic Operations

Adjusting the tone

Adjusting the treble (Gain,

Press the [A-M] button and select the item to

Frequency)

adjust. Each time you press the [A-M] button,

This adjustment can be performed when the Z-

the item changes as following order:

Enhancer Plus is set to “CUSTOM”.

When “B-BOOST” is set

1. Press the [A-M] button and select “TREBLE”.

“SW-VOL 0” “B-BOOST” “BAL 0”

2. Turning the [ROTARY] knob clockwise em-

“FADER 0” Last function mode.

phasizes the treble; turning it counterclock-

When “IMPACT” is set

wise attenuates the treble.

“SW-VOL 0” “IMPACT” “BAL 0”

The factory default setting is “TÅGAIN 0Δ.

“FADER 0” Last function mode.

(Adjustment range: –6 to +6)

When “EXCITE” is set

3. Press the [d] or [a] button to select

“SW-VOL 0” “EXCITE” “BAL 0”

TÅFREQ 12kΔ.

Turninng the [ROTARY] knob clockwise or

“FADER 0” Last function mode.

When “CUSTOM” is set

counterclockwise to select the frequency.

The factory default setting is “TÅFREQ 12kΔ.

“SW-VOL 0” “BASS” “TREBLE”

(Adjustment 8 kHz/12 kHz)

“BAL 0” “FADER 0” Last function

4. When the adjustment is complete, press the

mode.

[A-M] button several times until the function

When “Z+ OFF” is set

mode is reached.

“SW-VOL 0” “BAL 0” “FADER 0”

 

Last function mode.

Adjusting the balance

 

English

Adjusting the bass (Gain,

Frequency, Q-curve)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “BASS”.

2.Turning the [ROTARY] knob clockwise em- phasizes the bass; turning it counterclock- wise attenuates the bass.

The factory default setting is “BÅGAIN 0Δ. (Adjustment range: –6 to +8)

1.Press the [A-M] button and select “BAL 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

The factory default setting is “BAL 0”. (Adjust- ment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

3.Press the [d] or [a] button to select “BÅFREQ 50Δ.

Turninng the [ROTARY] knob clockwise or counterclockwise to select the frequency.

The factory default setting is “BÅFREQ 50Δ.(Adjustment 50/80/120 Hz)

4.Press the [d] or [a] button to select “BÅQ 1Δ.

Turninng the [ROTARY] knob clockwise or counterclockwise to select the Q-curve.

The factory default setting is “BÅQ 1Δ. (Ad- justment 1/1.25/1.5/2)

5.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

1.Press the [A-M] button and select “FADER 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

The factory default setting is “FADER 0”. (Ad- justment range: F12 to R12)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

DXZ738RMP 13