Sound Adjustment
English
●Adjustment items
*1 “CENTER” is displayed only when
*2
4.Touch on the right of the display to adjust to the gain level.
•
5.Repeat steps from 3 to 4 to adjust the desired item.
6.Press the [SOUND] button to return to the original mode.
Adjusting the filter frequency
●
This filter cuts the signals above the selected frequency value.
Each touch switches the frequency value as follows:
THROUGH ➜ 50Hz ➜ 80Hz ➜ 120Hz ➜
THROUGH...
Select the frequency that suits your subwoofer. Set to “THROUGH” if you use powered subwoofers with
1.Press the [SOUND] button.
2.Touch [FILTER].
3.Touch on the left of the display to select [HPF] or
4.Touch on the right of the display to select the frequency value.
•Select from THROUGH, 50Hz, 80Hz, or 120Hz.
5.Press the [SOUND] button to return to the original mode.
Filter frequency
You can set a filter frequency value best suited for your speakers.
•Depending on the settings for SPEAKER SELECT, filters (HPF or
SPEAKER |
| FILTER | |
SELECT | HPF |
| |
Dolby PL II | No |
| Yes |
NORMAL | Yes |
| Yes |
|
|
|
|
*This item can be adjusted only when “SUB- WOOFER” is set to “ON”.
•The factory default setting for FILTER is “THROUGH”.
Filter adjustment
●HPF
This filter cuts the signals under the selected frequency value.
Each touch switches the frequency value as follows:
THROUGH ➜ 50Hz ➜ 80Hz ➜ 120Hz ➜
THROUGH...
Select the frequency that suits your speaker when you have installed speakers with smaller diameter.
Set to “THROUGH” if you use speakers that can reproduce low frequency sound.
Setting the music mode
MUSIC mode
If you set Dolby Pro Logic II to “MUSIC”, you can further adjust the MUSIC mode in detail.
•This is available only when “MUSIC” has been selected.
•The factory default settings are “NO” for
“PANORAMA”, “3” for “DIMENSION”, and “3” for “CTR WIDTH”.
Adjustment items
●PANORAMA (Panorama control setting) Extends the front sound field image to rear speakers. Set to “YES” if you think the surround effect is not enough.
●DIMENSION (Dimension setting)
Shifts the sound field image to either front or rear. Set this item if the sound field image is weighted on either front or rear side.
The center adjustment value is 3. Select from 0 to 2 for weighting on the rear side. Select from 4 to 6 for weighting on the front side.
●CTR WIDTH (Center width setting) * Distributes a part of the center speaker sound to front speakers (left and right).
By distributing the center sound to front speakers, the entire sound field image, and you can feel the natural broadening of the sound field image.
36 DXZ956MC