Clarion EQS744 manual Applications, Mounting Precautions

APPLICATIONS

4

EQS744

Low-pass frequency switch - This allows the subwoofer crossover to be set at 60Hz or 90Hz.

Subwoofer level control - This is the volume control for the subwoofer. The sub woofer level control allows you to adjust the subwoofer volume at any time to match any listening preference.

AUX gain controls - These controls allow individual left and right input gain adjustment for the auxiliary input.

APPLICATIONS

The system diagram below will help you plan your own installation.

		Source Unit	Aux. Source
			VDH9300
F	+	-	POW ER
U			EJECT
S	BATTERY
E
		Remote Turn-on
		Chasis Groung
		(Bare Metal)

Front Amp/Rear Amp Sub Amp

RCA INPUTS	GAIN		BASS	FREQ	X-OVER	X-OVER	INPUT
			BOOST	Hz	FREQ
			dB	110	MULT	MODE	SELECT		POWER
			0	55	240
RIGHT
			18	550	x1	LP HP OFF
	.25v	2.5v		330			STEREO	L+R(SUM
					x10
LEFT							RIGHT(BRIDGED)MONO)

APX201.2

MOUNTING PRECAUTIONS

The EQS744 graphic equalizer can be mounted next to the source unit or under the dash with the supplied mounting brackets. For easy system set-up, mount the equaliz- er so the front panel controls will be easily accessible from the driver's seat after installation. In addition, observe the following precautions:

1.Check clearances on both sides of a planned installation before drilling any holes or installing any screws.

2.When routing RCA cables, keep them away from power cables and output speaker wires.