●Adjusting the balance

2-1. Select “BALANCE”.

3-1. Turn the [ROTARY] knob to adjust balance between right and left speakers.

∗The factory default setting is “CENTER”. (Adjustment range: RIGHT12 to LEFT12)

●Adjusting the fader

2-1. Select “FADER”.

3-1. Turn the [ROTARY] knob to adjust balance between front and rear speakers.

∗The factory default setting is “CENTER”. (Adjustment range: FRONT12 to REAR12)

●Adjusting the non-fader volume

Adjust volume output from the unit’s non-fader output terminal.

2-1. Select “NF VOL”.

3-1. Turn the [ROTARY] knob clockwise to increase volume; turn counterclockwise to decrease volume.

∗The factory default setting is “0”. (Adjustment range: +6 to –6)

Note:

•When in the sound adjustment mode, if no operation is performed for 10 seconds or more, the mode is cancelled and the unit returns to the previous mode.

Setting the MAGNA BASS EXTEND

The MAGNA BASS EXTEND function does not adjust low frequencies like normal sound adjustments, but emphasizes the deep bass range with dynamic sound.

∗The factory default setting is “OFF”.

1.Press and hold the [AUDIO] button (1 sec.) to enable MAGNA BASS EXTEND.

2.Press and hold the [AUDIO] button (1 sec.) to disable MAGNA BASS EXTEND.

Radio Operations

Changing the reception area

This unit is initially set to USA frequency intervals of 10 kHz for AM and 200 kHz for FM. When using it outside the USA, the frequency reception range should be switched to the intervals below.

 

 

U.S.

Other

Europe

 

 

standard

countries

standard

 

 

 

 

 

 

Frequency

10 kHz

9 kHz

9 kHz

AM

spacing

 

 

 

 

 

 

 

Frequency

530 to

531 to

531 to

 

 

range

1,710 kHz

1,629 kHz

1,602 kHz

 

 

 

 

 

 

Frequency

200 kHz

50 kHz

50 kHz

FM

spacing

 

 

 

Frequency

87.9 to

87.0 to

87.5 to

 

 

range

107.9 MHz

108.0 MHz

108.0 MHz

 

 

 

 

 

Setting the reception area

∗All station preset memories are lost when the reception area is changed.

1.Press the [BND] button and select the desired radio band (FM or AM).

U.S. standard (initial setting for US model)

2.While pressing the [AUDIO] button, press and hold the number “1” of the [DIRECT] buttons for 2 seconds or longer.

Other countries (new setting)

3.While pressing the [AUDIO] button, press and hold the number “2” of the [DIRECT] buttons for 2 seconds or longer.

Europe standard (initial setting for Europe model)

4.While pressing the [AUDIO] button, press and hold the number “3” of the [DIRECT] buttons for 2 seconds or longer.

English

M109 11