Clarion M109 Listening to broadcasts, Tuning, Seek tuning, Manual tuning, Recalling a preset station, Manual memory, Auto store, Preset scan, Instant station recall (ISR)

English

Listening to broadcasts

1.Press the [SRC] button and select radio mode.

2.Press the [BND] button and select the reception band. Each time the button is pressed, the band changes as follows:

F1 (FM1) ➜ F2 (FM2) ➜ F3 (FM3) ➜ AM ➜ F1 (FM1)...

Tuning

3 tuning modes are available: seek tuning, manual tuning and preset tuning.

Seek tuning

1.Press the [BND] button and select the desired band (FM/AM).

∗If “MANU” appears in the display, press and hold the [BND] button (1 sec.). “MANU” will turn off, and seek tuning will be enabled.

2.Press [x] or [v] to automatically seek a station.

Manual tuning

2 modes are available: Quick tuning and step tuning.

●Quick tuning

Press and hold [x] or [v] (1 sec.) to tune a station.

●Step tuning

Press [x] or [v] to manually tune a station.

Recalling a preset station

Atotal of 24 preset positions (6-FM1, 6-FM2, 6- FM3, 6-AM) can be used to store broadcast stations in memory. Press the corresponding [DIRECT] button to automatically recall the stored frequency.

Manual memory

1.Use seek tuning or manual tuning to select the desired station.

2.Press and hold one of the [DIRECT] buttons (2 sec.) to store the current station in preset memory.

Auto store

The auto store function stores up to 6 stations automatically tuned in sequential order. If 6 stations cannot be found, any previously stored station remains in its memory position.

1.Press the [BND] button and select the desired band (FM/AM).

2.Press and hold the [] button (2 sec.). The stations with good reception are stored automatically to the preset channels.

∗If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.

Preset scan

Preset scan sequentially receives stations stored in preset memory. This function is useful when searching for a station stored in the memory.

1.Press the [ ] button.

2.When the desired station is received, press the [] button again to continue receiving that station.

Note:

•Do not press and hold the [] button (2 sec.), or the auto store function will begin and the unit will begin storing stations.

Instant station recall (ISR)

The ISR function allows instant access to a favorite preset station. The function operates even when the unit is in other modes.

●ISR memory

1.Select the station you wish to store in ISR memory.

2.Press and hold the [ISR] button (2 sec.).

●Recalling a station with ISR

While in any mode, press the [ISR] button to turn on the radio function and tune the selected station. “ISR” appears on the display. Press the [ISR] button again to return to the previous mode.

12 M109