Setting the Z-enhancer
This unit comes with three types of sound tone effects stored in memory. Select the one you prefer.
*The factory default setting is
Each time you press
•
•
•
•
Switching the Clock Display
Press and hold the [BND] button, and then press the [DISP] button to switch between the operation mode and the clock display.
Setting the Clock
1)Press and hold the [BND] button, and then press the [DISP] button to display the clock display.
2)Press and hold the [BND] button, and then press the [DISP] button for 2 seconds or longer.
3)Press the [d] button, then set the current minute.
4)Press the [a] button, then set the current hour.
5)Press the [BND] button, then the clock is set.
Notes:
•If you select another operation mode while you are setting the clock, the clock setting operation will be canceled.
•If you remove the vehicle’s battery for a check or repair, the clock will be reset, so you must set it again.
Screen Saver mode
1)Press and hold the [BND] button, and then press the [SS] button to switch on, and off Screen saver mode
*The factory default setting is “SS On”.
Radio Mode Operations
FM Reception
For enhanced FM performance the ® tuner includes signal actuated stereo control and Multipath noise reduction circuits.
Listening to the Radio
1)Press the [FNC] button to select the radio mode, then the radio will be on.
2)To select a preset band, press the [BND] but- ton, then select one of the preset bands such as FM1, FM2, FM3, or AM. Every time the [BND] button is pressed, the display will change as:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1
3)Press the [a][d] button, then the station at which there is a broadcast will be selected (Seek selection).
Manual Tuning
1)Press the [BND] button, then select FM1, FM2, FM3 or AM.
2)Press and hold the [BND] button for 1 second or longer, then the display will show “MANU”, which means that a manual selection func- tion is on.
3)Press the [a][d] button and select the right station.
Seek Tuning
1)Press the [BND] button, then select FM1, FM2, FM3 or AM.
2)If the “MANU” on the display is on, press and hold the [BND] button for 1 second or longer. When the “MANU” display is off, the seek selection function is on.
3)Press the [a][d] button, then when it selects the station in which there is a broad- cast, it automatically stops.
English
M335/M235 9