Note: The screen mode will set after 5 seconds, pending that the MODE button is not
pressed.
The display image may appear coarse or grainy when viewed in Zoom mode.
Changing the Display Settings (Picture In Picture/Split Screen)
The display setting can be adjusted by pressing the PIP (Picture In Picture) button on the control
panel or remote control. This button selects between PIP and split screen viewing mode. In PIP
mode, the second image can be displayed in any of the four corners and in four different viewing
aspects. In split screen mode, the display is evenly divided between two AV sources.
To access PIP or split screen display setting, press the PIP button until the desired mode is
displayed. The screen will change in the following sequence: