PREPARATION

Parts list

(Qty) Component

Preassembled

Loose Components

(1)

Roto-molded subwoofer enclosure

(1) 17’ wire harness w/ pigtail style connector

(2)

8"; 2 ohm subwoofer

(4)

1" self-taping Phillips screws

(1)

100W class "D" amplifier

(1)

1/2" ground screw

(2)

Speaker grille

(1)

Star washer

 

 

(2)

Attachment Hold Down Clamps

 

 

(2)

“U” shaped brackets

WIRING:

Note: Installer MUST disconnect speaker-input leads to amplifier when using line-level input

OVERVIEW

The Clarion Camouflage subwoofer system provides for the installation of a low frequency driver in an enclosure which is powered by a small low current, high power class "D" (Digital) amplifier. The advantage to using this type of amplifier is in the low current consumption of the amplifier at high power levels. The class "D" amplifier provided with this system will produce a rated 100W into a 2 ohm load. The woofer supplied with this system uses a voice coil with rated imped- ance of 2 ohms, and therefore is not considered a standard woofer. Replacing the woofer with any driver having an impedance greater than 2 ohms will yield lower power output from the amplifier, and is not recommended.

PROCEDURE

Proper installation of this product requires proper tools and knowledge of car audio principles. If you are not comfortable performing any of the outlined tasks below, contact a professional installation facility to perform the work.

OUTLINE

Remove the head unit.

Connect the Clarion "T" harness between the radio and factory wiring and route the harness extension to rear pas- senger side of the vehicle.

Remove rear quarter trim panel.

Install subwoofer enclosure.

Test subwoofer enclosure and head unit functions (fade, balance, dim, etc.).

Adjust subwoofer gain.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CON- DITIONS.

(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDE- SIRED OPERATION.

1

Page 1
Image 1
Clarion PSWJPGC manual Preparation, Overview, Procedure, Qty Component Preassembled Loose Components

PSWJPGC specifications

The Clarion PSWJPGC is a premier multi-channel amplifier designed specifically for car audio enthusiasts seeking to enhance their in-car sound experience. Known for its robust performance and innovative technologies, it caters to those who prioritize high fidelity and power in their audio systems.

One of the standout features of the PSWJPGC is its Class D amplification. This technology allows the amplifier to produce high output power while remaining compact and lightweight. Class D amplifiers operate more efficiently than traditional Class AB models, resulting in less heat and better energy use. This efficiency translates into powerful sound output without draining the vehicle’s electrical system.

The Clarion PSWJPGC supports multiple channels, enabling users to connect a wide range of audio components, including subwoofers and speakers. With a total output power that can reach up to 1000 watts, the amplifier ensures that every note and bass drop is delivered with clarity and punch. This makes it ideal for both casual listeners and audiophiles who desire accurate sound reproduction.

Another key feature of the PSWJPGC is its built-in crossover. This technology allows users to fine-tune their audio setup by controlling the frequency ranges that each channel produces. With adjustable low-pass and high-pass filters, users can optimize sound quality and ensure their system maintains balance across all frequencies.

The PSWJPGC also boasts a sleek design, housing all its components in a stylish yet durable chassis. The compact size makes it easy to install in various vehicle types without compromising aesthetics or space. Its robust construction ensures longevity, even under rigorous conditions typically experienced in automotive environments.

For added convenience, Clarion integrates advanced protection circuitry within the PSWJPGC. This feature protects the amplifier from overheating, short circuits, and other potential issues, ensuring reliable performance over time.

In summary, the Clarion PSWJPGC is a powerful, efficient, and versatile amplifier tailored for car audio systems. With its Class D technology, multi-channel support, built-in crossover capabilities, and durable design, it stands out as an excellent choice for users wanting to elevate their in-car audio experience to new heights. Whether you are a seasoned audio expert or simply looking to enhance your driving soundtrack, the PSWJPGC delivers quality and performance that resonates.