Clarion RDX755Dz Basic Operations, Setting the Z-enhancer, Adjusting the tone, Adjusting the bass

Basic Operations

∗When you have entered a title in a CD, it ap- pears in the sub display. If you have not en- tered a title, “NO-TTL” appears in the title dis- play instead. For information on how to enter a title, refer to the subsection “Entering titles” in the “Other Handy Functions”.

Setting the Z-enhancer

This unit comes with 3 types of sound tone effects stored in memory. Select the one you prefer.

∗The factory default setting is “Z-EHCR OFF”. Each time you press Z-EHCR button 8, the tone effect changes in the following order:

“Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜ “Z- ENHANCER 3 ” ➜ “Z-EHCR OFF” ➜ “Z- ENHANCER 1”...

•Z-ENHANCER 1: bass emphasized

•Z-ENHANCER 2: treble emphasized

•Z-ENHANCER 3: bass and treble emphasized

• Z-EHCR OFF : no sound effect

Adjusting the tone

Press A-M button $ and select the item to adjust. Each time you press A-M button $, the item changes in the following order:

●When the Z-enhancer and tone bypass are off

“T-BYPASS”➜ “BASS” ➜ “TREBLE” ➜

“BALANCE” ➜ “FADER” ➜ Function mode...

●When Z-enhancer 1, 2 or 3 is set

“Z-EHCR”➜ “BALANCE” ➜ “FADER” ➜

Function mode...

Setting tone bypass

The tone bypass disables the tone (bass and treble) functions and cuts the noise generated when the tone functions are on.

1.Press A-M button $ and select “T-BYPASS”.

2.Turning the Rotary knob & clockwise sets the tone bypass to “YES” (ON); turning it counterclockwise sets the tone bypass to “NO” (OFF).

∗The factory default setting is “NO” (OFF).

∗If the setting is “YES” (ON), the bass and treble adjustments cannot be made.

3.When the adjustment is complete, press A-M button $ several times until the function mode is reached.

Note:

•If you set the Z-ENHANCER function to ON (1 to 3), you cannot set the tone bypass.

Adjusting the bass

1.Press A-M button $ and select “BASS”.

2.Turning the Rotary knob & clockwise empha- sizes the bass; turning it counterclockwise attenuates the bass.

∗The factory default setting is “0”. (Adjustment range: –6 to +6)

∗The bass cannot be adjusted if the tone by- pass setting is “YES” (ON).

3.When the adjustment is complete, press A-M button $ several times until the function mode is reached.

Adjusting the treble

1.Press A-M button $ and select “TREBLE”.

2.Turning the Rotary knob & clockwise empha- sizes the treble; turning it counterclockwise attenuates the treble.

∗The factory default setting is “0”. (Adjustment range: –6 to +6)

∗The treble cannot be adjusted if the tone by- pass setting is “YES” (ON).

3.When the adjustment is complete, press A-M button $ several times until the function mode is reached.

Adjusting the balance

1.Press A-M button $ and select “BALANCE”.

2.Turning the Rotary knob & clockwise empha- sizes the sound from the right speaker; turn- ing it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press A-M button $ several times until the function mode is reached.

Adjusting the fader

1.Press A-M button $ and select “FADER”.

2.Turning the Rotary knob & clockwise empha- sizes the sound from the front speakers; turn- ing it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “0”. (Adjustment range: F12 to R12)

3.When the adjustment is complete, press A-M button $ several times until the function mode is reached.

RDX755Dz 11