AUXILIARY VIDEO INPUTS OPERATION
The VMA1041 is equipped with two auxiliary A/VInputs.
1. Plug the AV1 Audio/Video Input cord into the AV1 and/or AV2 input jacks.
2. Connect Audio/Video Connectors to the Auxiliary Source.
3. Press the Input Selection button on the unit or remote control until VIDEO
1 or VIDEO 2 is displayed.
4. The selected auxiliary video source should be seen.
OPTIONAL REMOTE CONTROL BATTERY INSTALLATION
•Insert 2 AAAbatteries into the compartment located on the back of the unit,
observing the proper polarity.
NOTES:
•Each time you change the batteries, you must reprogram the channels.
•We suggest you use alkaline batteries; do not use rechargeable batteries.
•Always change all the batteries at the same time.
5