Clarion VMA7192 Mounting Options, Picture Adjustment, Care and Maintenance, Specifications

OWNER’S MANUAL

MOUNTING OPTIONS

Your Clarion VMA7192 monitor, has four (4) additional side threaded mounting holes, and is useable with all Clarion's mounting bracket methods. The slot on the back of the VMA7192 also accommodates dash-mount installations. In addition to this, the VMA7192 fits perfectly into all Clarion console shrouds, as well as our new headrest mounting bracket, HRM-150.

Painted Paper	M3 X 5 Threaded
	Side Mounts
Hole Covers
	1/4-20 Threaded
	Insert

PICTURE ADJUSTMENT

To adjust the picture brightness, contrast, tint, color, etc., use the Picture + and - buttons located on the front panel of the VMA7192. Press the + button to increase the picture brightness, contrast, etc. Press the - button to decrease the picture brightness, contrast, etc.

CARE AND MAINTENANCE

Cleaning the cabinet:

Use a soft, dry cloth to gently wipe off any dirt.

Do not use benzene, thinner, car cleaner, etc., as these substances may damage the cabinet or cause the paint to peel.

Cleaning the LCD panel:

Use a soft, dry cloth to gently wipe off any dust.

The surface is easily scratched; do not rub it with hard objects.

SPECIFICATIONS
GENERAL SPECIFICATIONS:
Power Requirement:	DC 12V (9-16V)
Power Consumption:	0.8A Max. (0.8A or Less)
Weight:	1.3lb (0.6kg)
Dimensions:	7-3/8" x 5-1/8" x 1"
	(188 x 130 x 36mm) (W x H x D)
Operation Temperature:	+5º ~ +40º C
Supplied Accessories:	Extension Cable with (male connectors
	Video 1 Input, Video 2 Input, Power
	Connector, 3.5mm IR Remote Out),
	Mounting Hardware
	50cm 2 Pin Power cable
MONITOR SPECIFICATIONS:
Display Type:	Color TFT Active Matrix LCD
Screen Size:	7" wide screen
Pixels:	1440 x 234
Screen Resolution:	336,960 Dots
Video System:	NTSC/PAL

4