(1) Listening to the radio
Press the [SOURCE] button and touch the [TUNER] key. The TUNER mode screen is displayed.
Press the [BAND] button on the remote control unit, or touch the [BAND] key to select the radio band. Each time the key is touched, the radio reception band changes in the following order:
FM1 FM2 FM3 AM1 AM2 FM1 …
The default setting is “FM1”.
Touch the [
] or [
] key to seek up or seek down.
If you keep touching the [
] key, manual tuning will be done in the direction of lower frequencies. If you keep touching the [
] key, manual tuning will be done in the direction of higher frequencies.
FREQUENCY MAP
AREA | BAND | RECEIVING | STEP | STEP | IF(Hz) | |
BAND(Hz) | SEEK(KHz) | MANU(KHz) | ||||
|
|
| ||||
U.S.A | FM1,2,3 | 87.9~107.9M | 200 | 200 | 10.7M | |
AM1,2 | 530~1710 K | 10 | 10 | 450K | ||
| ||||||
|
|
|
|
|
|
(2) Auto store
The Auto Store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains at the memory position.
Touch and hold the [AS] key more than 2 seconds. A beep sounds and the stations with good reception are stored automatically to the preset channels.
manual Owner’s English
40