CE225 PHONE AMPLIFIER USER GUIDE
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
•Read and understand all instructions.
•Follow all warnings and instructions marked on the product.
•Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
•Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.
•Avoid using a telephone (other than a cordless type) during an electrical storm.There may be a remote risk of electric shock from lightning.
•Do not use this telephone to report a gas leak in the vicinity of the leak.
•Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire.They may explode. Check with local codes for possible special disposal instructions.
Features
SHORT CORD
TO TELEPHONE
RED LED | VOLUME | |
CONTROL | ||
GREEN LED | ||
| ||
BOOST |
| |
| TO HANDSET |
Power Requirements
The CE225 requires two AAA batteries
Important: Disconnect the modular cord from the CE225 and the short cord from the telephone before opening the battery door or replacing the batteries.
Battery Installation
1.Remove screw from battery door.
2.Remove battery door and insert the batteries as indicated.
3.Replace battery door by sliding and snapping into place.
4.Replace screw to secure.
� | � |
Installation
1.Remove the handset modular cord from the telephone base and insert into the jack at the bottom (handset) of the CE225.
2.Insert the end of the short cord into the handset jack located in the base of the telephone.
3.All plugs should be inserted so that they “snap” into place.
4.Pick up the handset. Check for dial tone.
Volume Control
The CE225 provides 15 dB of volume control before the BOOST button is activated. Once the BOOST button is pressed, the CE225 will provide up to 28 dB of gain.The frequency level is controlled with the volume dial located on the top of the CE225.
1.Turn the frequency control upward to increase the volume of the higher frequencies; turning the frequency control downward will decrease the high frequencies back to normal.
If used together with a FCC68 certified Telephone Set, this amplifier may affect the compliance of Hearing Aid Compatibility and Volume Control of the telephone set in FCC68.
Clarity® PowerTM Technology
Insures the user that high frequency sounds are amplified more so than the lower frequencies. Conversations will not only be louder, but clearer and easier to understand.
Boost Button
The BOOST button engages the amplifier and Clarity Power.The BOOST button will automatically reset to OFF upon
BOOST button will need to be depressed with each phone call to restore settings.
Boost LED
The BOOST LED will illuminate green when the boost feature is activated.
Operation
Depress BOOST button and adjust the Volume Control to desired listening level.
Battery Indicator
Monitors the condition of the batteries.The indicator will flash red when the batteries should be changed.The led will only flash while the unit is in use. Replace the batteries as soon as possible. The battery should be replaced with 2 AAA batteries
Battery Life
The battery life depends upon how often and how you adjust the frequency level.The life of the battery should last between two and six months, depending on the type of use.
Trouble Shooting
The CE225 is designed for long and trouble free operation. However, if any problem arises in using your telephone disconnect the amplifier from the telephone.
If the problem does not go away after disconnecting the amplifier, than the problem lies in your telephone or telephone line. Notify your phone company or contact the manufacturer of the telephone for servicing procedures or facilities.
We welcome your feedback! Our Customer Service Representatives can be reached at
SAVE THESE INSTRUCTIONS
