20 21
Volume Control (earpiece and speakerphone)
During a call:
Press <UP/DOWN> to increase or decrease the listening volume. The current
setting is shown. When the volume reaches the minimum or maximum setting,
you hear two beeps. When you end the call, the setting will remain at the last
selected level.
Note: The handset earpiece volume setting (1-5) and speakerphone volume
setting (1-6) are independent.
Mute
Use the mute function to turn off the microphone while on a call. You can hear
the caller, but the caller does not hear you.
1. To mute the call
During a call, Press <MUTE/X>. When mute is on, the handset screen
shows Muted for a few seconds and the MUTE icon appears until you
turn off mute. Or mute is automatically canceled when you end the call.
Note: Mute will also be canceled automatically when you press <TALK
ON/ FLASH> to answer the second waiting call.
2. To un-mute the call
When mute is on, press <MUTE/X> and then resume speaking. When
mute is off, Microphone on appears temporarily on the handset screen.
HANDSET AUDIO OPERATIONS
Make a Call
1. Pre-dialing
Enter the phone number rst, then press <TALK ON/FLASH> or
<SPEAKER> to dial out the number. Press <TALK OFF/CLEAR> or
<MUTE/X> to clear the entry.
2. Direct Dialing
Press <TALK ON/FLASH> or <SPEAKER> to access dial tone, then enter
the phone number.
3. Dial a speed dial number
In idle mode, press and hold a dial pad key (0 through 9) to display the
desired speed dial entry.
The handset automatically dials out the displayed number.
- OR -
Press <TALK OFF/CLEAR> to stop dialing the displayed number.
Note: You need to set the speed dial number rst. If the speed dial
location you selected is empty, the screen shows the speed dial list
instead.
4. Call using the direct memory keys on base
In idle mode, press one of the Direct Memory Keys on the base, to dial
the number pre-stored into the keys. You need to set the Speed Dial
Memory keys rst. See Speed Dial Numbers.
5. Call from Directory
1. In idle mode, press <UP> to access the directory. Alternatively, press
<MENU/SELECT> to access the directory from the main menu.
2. Press <UP> or <DOWN> to select the desired directory entry.
3. Press <TALK ON/FLASH> or <SPEAKER> to dial out to the selected
entry.
USING YOUR PHONE