Clarity JV35 manual Phone base installation for wall mounting

Installation

2.Install the Base Plate by sliding the small tabs into the upper slots. Push on the bottom of the Base Plate until it snaps into place.

Fig. 5 - Phone base installation for wall mounting

3.Plug in the short phone cord.

4.Insert the AC Adapter cord into the receptacle on the back of the JV35. Then plug the

AC Adapter into an electrical outlet.

C. Batteries

During a power outage, the JV35 will maintain full function if back-up batteries have been installed in advance. If batteries are not installed during a power outage, the BOOST button, the voice announcements and the Ring Flasher will not work.

Note: A set of new batteries can last up to 100 hours during a power outage.

5