ENGLISH EN
How To Operate The Machine
How To Operate The Squeegee
The squeegee wipes the floor while the vacuum motor removes the dirty solution from the floor. Use your hand to lower or raise the squeegee handle. To operate the squeegee, follow this procedure:
1.To lower the squeegee and start the vacuum motor, move the squeegee lever to the right and down. See figure 17.
2.To raise the squeegee, lift the squeegee lever up. See figure 18.
NOTE: The center position lets the vacuum motor continue to run with the squeegee off the floor to avoid drips and also allows you to back up the machine.
How To Fill The Solution Tank
The solution tank can be filled in the front or through the clear drain hose at the rear of the machine (See figure 19). To fill the solution tank follow this proce- dure:
1.Add a cleaning chemical to the solution tank. For the correct amount of chemical, follow the directions shown on the container.
2.Fill the solution tank with water. When filling machine in the front with a hose, position hose inside the fill screen as shown in figure 19A.
When filling machine from the rear, position clear drain hose against bracket and insert hose as shown in figure 20 Solution level can be viewed from the back of the machine.
Figure 20
Figure 17
Figure 18
Figure 19A
Figure 19
Clarke® Operator's Manual (EN) - BOOST 28 |