Clarke CAV 26 manual 7

OPERATINGINSTRUCTIONS

4.Install a poly-liner (fig. 7, 1) in the debris canister (fig. 7, 2). To release the debris canister raise the lever (fig. 7, 3) as shown.. The poly-liner provides quick convenient disposal.

5.When the debris canister becomes full, the manometer (fig. 8, 1) reads in the red, deactivating all vacuum motors.

6.Allow time for the dust to settle, then operate the filter cleaning lever (fig. 9, 1) several times.

7.Remove the poly-liner and replace with a new liner.

8.Replace the debris canister. To fit the canister back in place, set it under the vacuum and push the lever downwards. This allows the canister to lift until it fits against the filtering chamber.

3

21

Figure 7

1

Figure 8

1

Figure 9

Clarke® American Sanders Operator's Manual - CAV 26 Page -7-