Caution!
12
Also, it is a good practice to physically disconnect any and all valuable electronics from the AC mains during electrical storms, as a lightning strike anywhere near your home can put a tremendous surge on the AC mains that can easily damage any piece of electronics, no matter how well designed and protected. The best protection in the case of severe electrical storms is to simply remove the electronics from any connection with the power grid.
2Select button
The Select button is used (along with the Mode button) when configuring the amplifier for either balanced or
3Channel status LED indicators
Each amplifier channel has two Channel LED indicators. They are used to indicate the use of either balanced (XLR) or
These indicators are also used to indicate fault conditions in your amplifier, should any ever arise. If a channel’s LED indicators blink red, there is a problem in that particular channel. If all the Channel LEDs are blinking red, there may be a systemic problem that is not specific to a particular channel.
If you see any Channel LED Indicator blinking red, please disconnect the amplifier from the AC mains immediately and check that all external connections are cleanly made and secure. If no fault is immediately obvious, please call your authorized Classé dealer for assistance.
4Mode button
The Mode button is used (along with the Select button) when configuring the amplifier for either balanced or