Classe Audio CA-2200 Specifications, Power output, Frequency response, Phase, Signal-to-noiseratio

Models: CA-2200

1 26
Download 26 pages 23.37 Kb
Page 23
Image 23
Specifications

Specifications

Classé Audio reserves the right to make improvements without notice.

Power output

200W/ch continuous rms @ 8Ω

 

(both channels driven)

400W/ch continuous rms @ 4Ω

Frequency response

 

10Hz – 22kHz (+0/-0.1dB)

 

Phase

 

10Hz – 155kHz (+0/-3.0dB)

 

better than -10° @ 22kHz

Signal-to-noise ratio

 

 

108dB

 

Channel separation

(ref. full ouput, 10Hz – 80kHz)

 

better than 110dB @ 20kHz

Noise floor (FFT)

 

all peaks less than -95dBV

 

Distortion (THD + noise)

 

(10Hz – 80kHz)

 

0.003% @ 8Ω

 

(unweighted, 1.0Vrms/1kHz input, 10Hz – 500kHz)

Voltage gain

 

 

29.1dB

Sensitivity

1.4Vrms for rated output @ 8Ω

Input Impedance

 

 

100kΩ

Rated power consumption (as per IEC60065 para. 2.3.10)

480W

Idle power consumption

 

 

166W

Mains voltage

 

specified on rear panel

 

 

(cannot be changed by dealer or user).

Dimensions (not incl. controls or connectors)

Width: 17.5” (445mm)

 

 

 

Height: 8.75” (222mm)

 

Shipping weight

 

Depth: 18.5” (470mm)

 

 

92lbs (42kg)

Net weight

 

 

80lbs (36kg)

For more information, see your Classé dealer, or contact:

Classé Audio

5070 François Cusson

Lachine, Quebec

Canada H8T 1B3

Telephone

+1 (514) 636-6384

FAX

+1 (514) 636-1428

http://www.classeaudio.com email: cservice@classeaudio.com

Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved. i-Command™ is a trademark of Equity International, Inc. All rights reserved.

AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved. Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.

23

Page 23
Image 23
Classe Audio CA-2200 Specifications, Power output, Frequency response, Phase, better than -10@ 22kHz, Signal-to-noiseratio