![](/images/new-backgrounds/1032135/3213587x1.webp)
44
5.The screen shows an error message and the Eject button does not eject the disc (or the player shows some other anomalous behavior).
3 Press the Standby button so the screen dims and the blue light goes on.
3 Using the rear panel power switch, turn off the unit for at least thirty seconds. Then turn the power back on and press Standby to restart the unit.
6.The IR remote control seems not to function.
3Ensure that there are no obstacles between the IR remote and the IR sensor (located to the right of the mute button).
3If the batteries are weak, replace them with fresh ones.unit.
7If any units do not appear on the CAN-Bus Devices screen.
3 Select back, then re-select more.
8If the unit remains absent on the
3 Check that the unit is running the latest software. The target unit may not be
3 Check the connections. Check that the Category 5 Network Cables are securely connected.
3 If the system involves an
3 Check the
lengths of
3 Check the cables. Ensure that you are using straight through Category 5 Network Cables.