Classe Audio SSP-300 owner manual Triggers setup, Teach IR Display setup

triggers setup

teach IR

display setup

50

Each of the SSP-300’s DC triggers may be programmed to either “logic” (12V) or “inverse logic” (0V) settings. The ability to change the way the trigger operates can solve installation-specific problems that otherwise require external devices that add to both the cost and complexity of your system.

For more information on the use of DC triggers, we recommend you speak with your authorized Classé dealer.

The SSP-300 provides discrete infrared (IR) command codes for all its functions, a list that extends far beyond what is required by normal remote controls. However, many of these functions are critical if you plan to create a customized remote control with macros that take command of your entire system. Without these discrete codes, many of the macros you might want to create will simply not work reliably.

The teach IR screen provides a scrolling list of all the available IR codes in the SSP-

300.By scrolling to the command you need to learn into your macro-capable remote, and then pressing the send IR code button, the SSP-300 will continue to send the appropriate command code out of its front panel-as long as the button is pressed–where it can be learned by your third-party remote control.

For more information on such control systems, we recommend you speak with your authorized Classé dealer.

This button brings up the display setup menu. It allows you to configure the SSP-300’s LCD screen brightness, the display timeout, and the language used in the touchscreen and menu system. It also determines the format of your OSD (on-screen display), how long the temporary display lasts on your main television (e.g., the message that appears on your television when you change inputs or volume), and how volume settings are displayed on your system.