CONVERGE™ PRO 880 DATA SHEET <
>CONVERGE™ PRO 880 BACK PANEL
>SPECIFICATIONS
Audio Performance
Conditions: Unless otherwise specified, all measurements are performed with a 20 Hz to 22 kHz BW limit (no weighting)
Frequency Response: 20 Hz to 22 kHz ±1dB
Noise (EIN):
THD+N: <0.02%
Dynamic Range: 100 dB (non
to channel
Auto Mixer Parameters
Number of Open Microphones (NOM)
PA Adaptive Mode
First Mic Priority Mode
Last Mic Mode
Maximum # of Mics Mode
Ambient Level
Gate Threshold Adjust
Off Attenuation Adjust
Hold Time
Decay Rate
Matrix Mixing Parameters
12 analog in/out
18 expansion bus in/out
8 assignable processing blocks in/out
4 assignable fader blocks in/out
Assignable Processing Blocks
Filters:
All pass
Low pass
High pass
Low shelving
High shelving
Parametric EQ
Notch
CD Horn
Crossovers:
Bessel
Butterworth
Compressor
Delay; adjustable up to 250 ms
Gain/Mute | Autoswitching with Quality of Connection | 14° |
| (QoC) | temperature |
Microphone Input Configuration | 10/100 Mbps Ethernet Network Port |
|
Input Gain Adjust | 10/100 Mbps Ethernet PC Port | Approvals & Compliance |
Mic or Line Level | ||
Phantom Power on/off |
| interconnections — Grounding and |
Echo Cancellation on/off |
| EMC practices — Shields of connectors |
Noise Cancellation on/off | Serial Command Protocol Only (Console | in audio equipment containing active |
Filters: | software not supported on RS- 232 port) | circuitry (self certified) |
All Pass | U.S.A. & Canada | |
Low Pass | 9,600/19,200/38,400/57,600/115,200 baud | CSA safety listed |
High Pass | rate; 8 bits,1 stop bit, no parity | EU Countries |
Notch | Hardware flow control on (default)/off | RoHS compliant |
PEQ |
| WEEE compliant |
Mute on/off | USB | See product manual for additional details |
Chairman Override on/off | Version 2.0 Compatible |
|
AGC on/off | Type: | Optional Accessories |
Automatic Level Control on/off |
|
|
Auto Gate/Manual gate | Control/Status Ports |
|
Adaptive Ambient on/off |
| |
Pre AEC channel | Inputs A/B: active low (pull to ground) |
|
| Outputs A/B: open collector, 40 VDC max, |
|
Mic/Line Inputs | 40 mA each |
|
+3.3 VDC pins (2) (300 mA |
| |
bridging | protected) |
|
Impedance: < 5 KΩ |
| Converge Pro 880 |
Nominal Level: adjustable |
| Converge Pro 880T |
(7 dB step coarse gain adjustment) |
| Converge Pro 840T |
Maximum Level: |
| Converge Pro 8i |
Echo Cancellation: 130 ms tail time (works |
| Converge Pro TH20 |
with 12 dB of room gain) |
| Converge Pro 880TA |
Noise Cancellation: |
| Converge SR 1212A |
Phantom Power: 24 V, selectable |
| Converge SR 1212 |
|
| Tabletop Controller |
Line Inputs |
|
|
Configuration & Administration Software |
| |
bridging | Converge™ Console | Part Number |
Impedance: < 5 KΩ |
| |
Nominal Level: 0 dBu | Power Input Range | AEC Microphone Mixer |
Maximum Level: 20 dBu |
| |
|
| |
Outputs |
|
|
Power Consumption |
| |
Impedance: < 50 Ω | 30 W Typical |
|
Nominal Level: 0 dBu |
|
|
Maximum Level: 20 dBu | Dimensions (L x D x H) |
|
| 17.25” x 10.25” x 1.75” |
|
Expansion Bus In/Out | 43.8 x 26 x 4.5 cm |
|
Proprietary Network |
|
|
Weight |
| |
Category 5 | 7.5 lbs/3.3375 kg unit weight |
|
cable length between any two Converge | 12 lbs/5.4kg shipping weight |
|
Pro devices |
|
|
Assignable Fader Blocks | Ethernet | Operating Temperature |
|
>CLEARONE LOCATIONS
Headquarters: | Latin America | EMEA | APAC |
Salt Lake City, UT USA | Tel: | Tel: 44 (0) 1189 036 053 | Tel: |
5225 Wiley Post Way | global@clearone.com | global@clearone.com | global@clearone.com |
Suite 500 |
|
|
|
Salt Lake City, UT 84116 |
|
|
|
Tel: |
|
|
|
Toll Free: |
|
|
|
Fax: |
|
|
|
sales@clearone.com |
|
|
|
© 2009 ClearOne Communications, Inc. All rights reserved. Information in this document is subject to change without notice. Other product names may be registered trademarks of their respective owners who do not necessarily endorse ClearOne or ClearOne’s products in the United States and/or other countries.
ClearOne Document:
