Disassembly
2 - 8 Removing the Modular Drive Bay (Bay Two) Device
2.Disassembly
Removing the Modular Drive Bay (Bay Two) Device
1. Turn the computer OFF, remove the battery (page 2 - 6) and turn it over.
2. Remove screws - in (Figure 2 - 3a), then lift the cover off the changeable drive bay and set it aside.
3. Remove screw (Figure 2 - 3b), then gently push the device out of the bay (you may need to use a screwdriver).
Figure 2 - 3
Modular Drive (Bay
Two) Device
Removal
Sequence
a. Remove the screws
from the changeable
drive bay cover.
b. Remove screw 5.
c. Push the device out
of the computer.
1 3 4
5
a.
b.
2
1
3
c.
5
4
6
4. Drive bay cover
6. CD device
•4 Screws