Note:
▪Apply DC12V 250 mA regulated power supply (not included).
▪To avoid fire or shock hazard, use a UL listed power supply.
TROUBLE SHOOTING
If the camera does not function properly, check the following points before contacting the service center.
Troubles | Remedies |
No video | Check the AC adapter and video cable |
| between the camera and a monitor |
The image on the screen is dark | Check the brightness control on the |
| monitor |
The image on the screen is dim | Check if the lens is stained. If dirty, |
| clean it with soft and clean cloth |
The camera is not working properly, and | Check if you have connected the |
the surface of the camera case is hot | provided AC adapter |
The contrast on the screen is too weak | Adjust the contrast feature of the |
| monitor. If the camera is exposed under |
| too strong light, change the position |
The image on the screen flickers | Does the camera face to directly to the |
| sunlight or fluorescent light? Change the |
| camera position |
Picture rolls and jumps, scrambled | Improper |
picture | monitor |
Picture smaller than screen | House current may be too low |
SPECIFICATIONS
• | Image sensor | 1/3” SONY Super HAD CCD |
• | Total pixels | 811(H) x 508(V) |
• | Effective Pixels | 768(H) x 494(V) |
• | Scanning system | 2:1 Interlace |
• | O.S.D | Available |
• | Backlight | Off / HSBLC / BLC selectable |
• | Resolution | 550TV Lines(color),600TV Lines(B/W) |
• | S/N (Y signal) | 52dB (AGC Off, Weight On) |