Clover Electronics HDC255 instruction manual Precautions, Features, Installation

PRECAUTIONS

•To avoid electrical shock, do not open the case of this product.

•Operate this product using only the supplied AC Power supply.

•Do not overload electrical outlets or extension cords; this can result in fire or electric shock.

•Keep this product away from strong magnetic fields.

•Do not expose this product in direct sunlight or strong reflected rays.

•Refer servicing to qualified personnel only.

•Do not change or modify this product, the warranty will be voided.

FEATURES

•Weatherproof (IP67)

•1/3” Sony Super HAD CCD

•High Resolution 560 TV Lines

•Rugged Steel Construction

•Dual Illuminators (total 36 Infrared LEDs with 2 CDS sensors)

•Up to 90’ IR range (depends on scene reflection)

•DC Auto Iris Vari-focal Lens (4-9mm)

•Attached Universal Mounting Bracket and 100’ cable

•DC12V Power Source

INSTALLATION

1.Attach the mounting bracket base ring① to the wall or ceiling, wherever you want to install the camera. Locate a wall stud or ceiling joist and secure the bracket base ring using the supplied screws. Attach the mounting bracket② to the base ring① and secure them using the supplied screws.

2.Lock the mounting bracket with the locking ring③.

3.Turn the pivot locking screw④ with the provided hex-head wrench counter- clockwise to set the desired angle of camera toward objects and turn it clockwise to secure. It can be used for wall-mount or ceiling-mount application depending on setting this pivot locking screw.

4.Loosen the locking screw⑤ with the provided hex-head wrench and turn the camera

clockwise or counter-clockwise to upright images on the screen and turn it clockwise to secure.

5. Connect the one end of 100’ cable (supplied) to the Din jack of 5’ cable attached to the camera. Make sure that two arrows on the top of them should be aimed at each other. Connect the other end (BNC or RCA) of cable to the video devices such as