Cobalt Networks 9032 owner manual Frame Sync, Presets, Video Signal, Controls

Menu	Item	Format	Description
	Framesync Enable	On/Off	Enables the Frame Sync
	Horizontal Offset	0-4125 samples	Applies additional
			horizontal offset
	Vertical Offset	0-1124 lines	Applies additional vertical
			offset
	Minimum Latency	3-1124 lines	Selects the minimum lines
	Lines		of latency allowed.
Frame Sync
	Minimum Latency	0-27	Selects the minimum
	Fields		fields of latency allowed.
	Framesync Status	On/Off/Error	Shows the status of the FS
			Resets the FS and its
			buffers. Re-establishes
	Reset Framesync	Confirm	audio video sync after a
			adjusting the horizontal
			and vertical offsets.

Menu	Item	Format	Description
	Parameter Save	Confirm	Saves the parameters as
			preset.
Presets	Parameter Load	Confirm	Loads parameters
			previously saved.
	Restart Parameters	Confirm	Will load factory presets
	to Factory Default		and overwrite the save.

Menu	Item	Format	Description
		Composite	Selects the format of
			input SD analog video, so
		Y/C
			the decoder can properly
		YPbPr BetaCam
	SD Input Type		decode the signal.
		YPbPr MII
Video Signal		YPbPr SMPTE
Controls	HD Input Type	GBR	Selects the format of
			input HD analog video.
		YPbPr
			Specifies the amount of
	SD Composite	0.0 or 7.5 IRE of Setup	setup (pedestal) in the
	Contains		input video. It will be
			removed by the decoder.

9032 Owner’s Manual • (V 2.0) Page 17 of 24