Cobalt Networks 9033-SD owner manual Technical Specifications, 20dB to 30MHz, 0.2% of amplitude

Technical Specifications

Table 4. Card - Technical Specifications

	Number of Inputs	3
	Input Type	Differential, Common Mode Rejection (5V AC)
	Video Inputs	Composite, Component YPbPr (BetaCam™, MII™,
		SMPTE/N10), RGB, and Y/C
	Conversion Bit Depth	12-Bits
Analog Video	SD Color Separation	5-Line Adaptive Comb or Notch Filter
	Frequency Response	Y- 0-30MHz ± 0.25db PbPr 0-15 MHz ±
Input
	Differential Phase	< ±0.4° typical
	Differential Gain	< ±0.4% typical
	Noise	< -64dB (Luma Flat Field)
		< -61dB (Luma Ramp)
	Analog Front End Crosstalk	Within Noise Floor Measurement
	Return Loss	> 20dB to 30MHz
	Number of Outputs	2:SD-SDI BNC per IEC 60169-8 Amendment 2
	Impedance	75Ω
Serial Digital	Return Loss	> 15 dB at 5MHz – 270MHz
	Signal Level	800 mV ±10%
Video Outputs
	DC Offset	0 Volts ±50 mV
	Jitter	<0.06UI (all outputs)
	Overshoot	<0.2% of amplitude
	Standard	SMPTE 276M
	Number of Inputs	8 unbalanced
	Input Level	0.1 to 2.5V p-p (5V p-p tolerant)
AES Audio
	Input Impedance	75Ω
Input
	Return Loss	> 12dB 100kHz to 6MHz
	Equalization	Automatic to 1000m with Belden 1694A (or
		equivalent) @ 48kHz AES signal
	Sample Rate	48KHz

Page 20 of 26 9033-SD Owner’s Manual • (V 1.1)