Cobalt Networks Co11 manual Condenser Vocal Microphone Specifications

Cobalt™ Co11

Condenser Vocal Microphone

Specifications

Element	Self-Biased Condenser
Frequency Response	50 Hz to 20 kHz
Polar Pattern	Cardioid
Impedance	Low-Z balanced (250 Ohms)
Sensitivity
Open Circuit Voltage	4.0 mV/PA (-48 dBV) re 1 Pa*

Clipping Level, 1KHz

Maximum SPL, 1 KHz

Self-Noise

Dynamic Range, (Maximum SPL to A Weighted noise level)

-3 dBV 130 dB SPL (1% THD)

26dBA

113dB

Signal-to-Noise Ratio

Microphone Connector

Polarity

Power

Finish/Materials

Dimensions

Length

Diameter

Shank

Weight, Net

Accessories included

68 dB (@ 94 dB SPL) 3-pin, XLR-type

Pin 2 positive, referenced to pin 3 with positive pressure on diaphragm

Phantom Supply Requirement: 24 to 48 Vdc, positive at pins 2 & 3, Current Drain: Up to 10 mA

Durable Polyurethane painted, die cast zinc

6.8in. (173 mm)

2.1in. (53 mm)

.80 in. (20 mm)

10.3 oz. (292 grams)

Stand adaptor (black) and Gig bag

12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www.electrovoice.com © Telex Communications, Inc. 9/2003 Part Number 38110-129 Rev. B

U.S.A. and Canada only. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212For warranty repair or service information, contact the Service Repair department at: 800/553-5992 or 402/467-5321For technical assistance, contact Technical Support at: 800/392-3497 or 952/736-4656Specifications subject to change without notice.