Setting Dynamike

This controls the microphone sensitivity
(outgoing audio level).

ToTransmit

21

To Transmit Transmit

20

Setting

Dynamike

Caution!
Be sure the antenna is properly
connected to the radio before
transmitting.Prolonged trans-
mitting without an antenna,or
a poorly matched antenna,
could cause damage to the
transmitter.
Be sure to read the F.C.C.Rules
and Regulations included with
this unit before transmitting.
Operation Operation
1
Selectdesired channel.
1
Initially,set fully clockwise so that maxi-
mum voice volume is available.Dynamike
may have to be reduced in some conditions.

Transmit

Push and holdmic button to transmit.
Transmitter is now activated.When transmit-
ting,hold the microphone two inches from
your mouth and speak in a clear,normal voice.
Releaseto receive.
1
29 NW ST manual3.3 6/15/99 12:50 PM Page 20