Operation, Attach Antenna Attach Antenna

37st manual layout.5 10/1/98 9:56 AM Page 8

Operation

1Insert.

2 Turn clockwise.

Attach Belt Clip

Note

Clip slides up to attach and slides down to remove.

Install Batteries

1Remove battery chamber cover.

2Install batteries by polarity markings.

3Replace cover.

Note

Ignoring polarity markings can cause damage to both the unit and the batteries.

The HH 37 ST requires 9“AA”

alkaline or NiCad batteries

(not included with the unit).

When batteries are low or need charging the TX/Batt LED will remain on. Replace alkaline batteries or recharge NiCad batteries.

Image 4

Contents

If You Think You Need Service Operating Instructionsway communications service was openedFCC Regulations FCC Warnings SoundTrackerTM Controls and Indicators Our Thanks to YouCustomer Support How to Use Your Cobra HH 37 ST Contents Battery Installation OperationAttach Antenna Attach Antenna Attach Belt Clip Setting Squelch Fully counterclockwise opens the gateand all signals enter Turn power on Select ChannelLED Display Select Channel LED Display Transmit/Receive Transmit/Receive To transmit, push and hold PTT button SoundTracker ActivatingSoundTrackerTM System Activating SoundTrackerTM Testing SoundTracker Testing SoundTrackerTMTurn the volume up louder than your normal listening level Pushand release the ST button External Speaker Microphone Jack Power Saver Power Saver-HI/LOWVehicle Use External Speaker/Microphone Jack Few Rules You Should Know How Your CB Can Serve YouChannel Emergency Messages Standard questions and answers. These codes CB 10-CodesCB 10-Codes Common codes and meanings HH 37 ST Specifications Frequency RangesFreq MHz Limited Two Year Warranty Optional Accessories West Cortland Street Chicago, Illinois Exp. Date Customer Signature Accessory Order FormMasterCard Discover