Cobra Electronics CXR725C Channels, Or Channel Down button, Listening for a Response, Call Button

Operation	Using Your Radio
Channels		•
	With the radio on, select any of the
ChannelButton
	22 channels by pressing the Channel Up
	or Channel Down button.
	Both radios must be tuned to the
ChannelNumber	same channel to communicate.
	Channels 1 through 7 are shared by FRS and
	GMRS. Channels 8 through 14 are FRS only.
	Channels 15 through 22 are GMRS only.
	See page 26 for FRS/GMRS frequency
	allocations and compatibility charts.
Listening for a Response		•
Listening	Release the Talk button to receive incoming
	transmissions. Your microTALK radio is always
	in Standby mode while the Talk or
	Call buttons are not pressed.
Call Button		•
CallButton	To alert another person that you are calling:

–Press and release the Call button.

The other person will hear a two second call tone. This tone is used only to establish voice communications.

See page 24 on how to select from 10 available call tone settings.

4

Introduction Operation Customer Assistance Warranty

Selectable High•Low Power Output		•
	When in close proximity to another party or
Hi-LowButton
	during favorable conditions, you can switch
	from High to Low Power to extend battery life.
	This feature applies to GMRS Channels
HiPowerIcon	1 through 7 and 15 through 22 only.
	Channels 8 through 14 operate
	exclusively on low power.
	To toggle between high and low power:
LowPowerIcon	– Press and release the Hi•Lo button.
	When using Channels 1 through 7 and
	15 through 22 on high power, the Hi icon
	will be visible on the display.
	When using those channels on low power
	and on Channels 8 through 14, the Low icon
	will be visible on the display.
To Illuminate Display		•
	Press and release the Light/Max Range
Light/MaxRange
	button to illuminate the display for
	10 seconds.

Nothing Comes Close to a Cobra® 5