Cobra Electronics CXT425 owner manual Scrolling through Mode Functions, Privacy Codes

Mode Functions
Operation
Scrolling through Mode Functions	•
By scrolling through the Mode Functions, you will be able to

Introduction	Operation	Customer Assistance	Warranty
Set CTCSS Privacy Codes			•
Mode/Lock Button	1. After selecting a channel, press

select or turn on/off preferred features of your microTALK radio. When scrolling through the Mode Functions, your radio features

will be displayed in the following order:

Mode/Lock Button	Set CTCSS Privacy Codes
	Set DCS Privacy Codes
	Set NOAA All Hazards Radio Channel
	Set VOX On/Off
	Set VOX Sensitivity Level
	Set Memory Locations
	Set Channel Scan
	Set CTCSS Privacy Code Scan
	Set DCS Privacy Code Scan
	Set Memory Location Scan
	Set Call Tones

CTCSS Privacy Code

Channel Buttons

the Mode/Lock button until the small numbers next to the channel number flash on the display.

If DCS is turned on at the channel selected, the display will flash the

CTCSS icon and “OFF.” To switch from

DCS to CTCSS, press the Channel Up

or Channel Down button while the

display is flashing “OFF.” The display will then show the small numbers flashing and you will then be able to proceed to step 2.

Set Roger Beep On/Off
Set Keystroke Tones On/Off
Scroll through the mode functions using the Mode/Lock button.
Each press and release of the Mode/Lock button will advance to
the next mode function. Press the Talk button at any point to
return the radio to Standby mode.
Privacy Codes	•
Your microTALK radio incorporates two advanced coded squelch

systems that can help to reduce interference from other users

on any given channel. CTCSS (Continuous Tone Coded Squelch System) provides 38 privacy codes and DCS (Digitally Coded Squelch) provides 83 privacy codes. This provides a total of 121 Privacy Codes. Either system can be used on all channels, but both systems cannot be used on the same channel at the same time.

To successfully communicate using a privacy code, both the sending and receiving radios must be tuned to the same channel and to the same privacy code system (CTCSS or DCS) and privacy code number. Each channel will remember the last privacy code system and number you select.

The privacy code 00 is not a privacy code, but allows all signals to be heard on a channel that is set to 00 on both the CTCSS and DCS systems.

8

2.Press using the Channel Up or Channel Down button to select a privacy code. You can hold the Up or Down button for fast advance.

3.When your desired CTCSS privacy code is displayed, choose one of the following:

a.Press the Mode/Lock button to enter the new setting and proceed to other functions.

b.Press the Enter/Hi•Low button to enter the new setting and return to Standby mode.

c.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.

9