Mode Functions
Operation
Set DCS Privacy Codes
•
Mode Button | To select a DCS privacy code: |
| 1. After selecting a channel, press the Mode |
| button until the DCS icon appears and the |
| small numbers flash on the display |
| (01 through 83). |
DCS Privacy Code | |
| NOTE |
| If CTCSS is turned on at the channel |
| selected, the display will flash the |
|
|
|
|
Introduction | Operation | Customer Assistance | Warranty |
Voice Activated Transmit (VOX)
•
In VOX mode, your microTALK® radio can be used
Mode Button | To turn VOX mode on or off: |
| 1. Press the Mode button until the VOX icon |
| flashes on the display. The current on or |
| off setting is displayed. |
Channel Buttons |
| DCS icon and “OFF.” To switch from |
|
| CTCSS to DCS, press the Channel Up |
|
| or Channel Down button while the |
|
| display is flashing “OFF.” The display |
|
| will then show the small numbers |
|
| |
|
| flashing and you will then be able |
|
| to proceed to step 2. |
|
| 2. Press using the Channel Up or Channel Down |
|
| button to select a DCS privacy code. You can |
|
| hold the Up or Down button for fast advance. |
|
| 3. When your desired DCS privacy code is |
|
| displayed, choose one of the following: |
|
| a. Press the Mode button to enter the new |
VOX Icon
Channel Buttons
Mode Button
2.Press the Channel Up or Channel Down button to turn VOX on or off.
3.Choose one of the following:
a.Press the Mode button to enter the selected on or off setting and proceed to other functions.
b.Press the Lock/Enter button to enter the selected on or off setting and return to Standby mode.
To set VOX sensitivity:
1.Press the Mode button until the VOX icon flashes and the current sensitivity level is displayed.
setting and proceed to other functions. |
b. Press the Lock/Enter button to enter the |
new setting and return to Standby mode. |
c. Do not press any buttons for 15 seconds |
to enter the new setting and return to |
Standby mode. |
VOX Sensitivity Level
Channel Buttons
The current sensitivity level is displayed with letters “LE” and a Number 01 through 03, with Number 03 being the most sensitive level and Number 01 being the least sensitive level.
2.Press the Channel Up or Channel Down button to change the setting.
3.Choose one of the following:
a.Press the Mode button to enter the selected setting and proceed to other functions.
b.Press the Lock/Enter button to enter the selected setting and return to Standby mode.
10 English
Nothing Comes Close to a Cobra® 11
