MODE FUNCTIONS | English |
During An Incoming Transmission,
You Can Choose From The Following:
a. Press and hold the TALK button to communicate on that channel/privacy code. Your radio will remain on that channel/privacy code and return to LISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN button to resume scanning CTCSS privacy codes.
If you press the TALK button while scanning and not within ten (10) seconds of receiving a transmission, you will transmit on the channel/privacy code on which you last received a transmission. This will return the radio to LISTENING MODE.
If you do not press any button within ten (10) seconds, your radio will automatically resume scanning CTCSS privacy codes.
During Scanning (while not receiving a transmission), You Can Choose From The Following:
a. Press and hold the TALK button to communicate on either the channel or channel/privacy code that was displayed before you entered Mode Functions or channel/privacy code on which, during scanning, you last received a transmission. This will return the radio to LISTENING MODE.
b. Press the MODE button to proceed to next available Mode Function.
c. Press the LOCK button to return to LISTENING MODE on either the channel or channel/privacy code that was displayed before you entered Mode Functions or the channel/privacy code on which, during scanning, you last received a transmission.
VibrAlert® and Call Alert
Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently, or both.
VibrAlert® Icon
VibrAlert® & Call Alert Icon
To Change Call Settings:
1.Press the MODE button until the Call Setting icon flashes on the display. The current setting (“01”
– Vibrate + Ring, “02” – Vibrate Only, or “00” – Ring Only) is displayed.
2.Press the CHANNEL UP or CHANNEL DOWN button to change the call setting.
Mode Button
Channel Buttons
Call Alert Icon
