OPERATION and |
|
MODE FUNCTIONS | English |
External Speaker/Microphone/ Charge Jack
Your microTALK® radio can be fitted with an external speaker/microphone, freeing your hands for other tasks.
To Attach the External
Speaker/Microphone or
Charger:
1.Open the charge tab on top of the radio.
2.Insert the plug into the jack.
To Select a CTCSS Privacy Code:
1. After selecting a channel, press and release the MODE button until the CTCSS icon flashes on the display. In addition to the CTCSS icon, either OFF or the small numbers next to the channel number will also flash on the display.
2. If CTCSS and OFF are
Earbud Microphone
1.Plug earbud microphone into radio.
2.Place earbud in ear.
3.Clip microphone onto clothing 76 mm to 152 mm (3" to 6") from your mouth.
4.Push to talk.
Radio Charger Jack
1 |
Placed in Ear
2
flashing, press the CHANNEL UP or CHANNEL DOWN button to exit OFF and proceed to select a privacy
code. Or, if CTCSS and the small numbers next to the channel number are flashing, press the CHANNEL
UP or CHANNEL DOWN button to select a privacy code.
Clipped to Clothing
3
Clipped to Clothing
4
3. When your desired privacy code is displayed, choose one of the following:
a. Press the MODE button to enter the new setting and proceed to other functions.
b. Press the LOCK button to enter the new setting and return to LISTENING MODE.
c. Do not press any buttons for 15 seconds to enter the new setting and return to
LISTENING MODE.
Scrolling Through the Mode
DCS Privacy Codes
Functions
By scrolling through the Mode Functions, you will be able to select or change preferred features of your microTALK® radio. While you are scrolling through the Mode Functions, your radio features will be displayed in the same predetermined order:
Set CTCSS Privacy Codes
Set DCS Privacy Codes
Set VOX On/Off
Set VOX Sensitivity Level Set Channel Scan
Set CTCSS Privacy Code Scan
Set DCS Privacy Code Scan Program Dual Watch Location or
Set Dual Watch On/Off Set Baby Monitor
Set Call Tones
Set “Roger Beep” On/Off
DCS (Digital Coded Squelch) is an advanced digital coding system allowing you to select one of 83 privacy codes to reduce incoming transmissions from other users on the channel.
NOTE: If you are using a DCS code, both radios must be tuned to the same channel and DCS privacy code to communicate. Each channel will remember the last privacy code you selected.
To Select a DCS Privacy Code:
Mode Button
DCS OFF
Select Privacy Code
Channel Buttons
Set Keystroke Tones On/Off
CTCSS Privacy Codes
CTCSS (Continuous Tone Coded Squelch System) is an advanced tone coding system allowing you to select one of 38 privacy codes to reduce incoming transmissions from other users on the channel.
NOTE: If you are using a CTCSS privacy code, both radios must be tuned to the same channel and CTCSS privacy code to communicate. Each channel will remember the last privacy code you selected.
1.After selecting a channel,
press and release the MODE button until the DCS icon flashes on the display. In addition to the DCS icon, either OFF or the small numbers next to the channel number will also flash on the display.
2.If the DCS and OFF are flashing, press the CHANNEL UP or CHANNEL DOWN button to exit OFF and proceed to select a privacy code. Or, if DCS and the small numbers next to the channel number are flashing, press the CHANNEL UP or CHANNEL DOWN button
to select a privacy code.
