Operation
Mode Button
Mode Functions
To Set VOX Sensitivity:
1.Press the Mode button until the VOX icon flashes and the current sensitivity level is displayed.
Introduction | Operation | Customer Assistance Warranty |
During Channel Scan (while receiving an incoming transmission), You Can Choose From The Following:
a. Press and hold the Talk button to communicate on that channel. Your radio will remain on that channel and return to Standby mode.
VOX Sensitivity Level | The current VOX sensitivity level is |
| |
| displayed with letters “LE” and a Number |
| 1 through 5, with Number 5 being the |
| most sensitive level and Number 1 |
| being the least sensitive level. |
Channel Button |
2.Press the Channel Up or Channel Down button to change the setting.
3.Choose one (1) of the following:
a.Press the Mode button to enter the selected setting and proceed to other functions.
b.Press the Lock button to enter the selected setting and return to Standby mode.
Channel Scan
•
Your microTALK® radio can automatically scan channels.
b. Press the Channel Up or Channel Down button to resume scanning channels.
If you press the Talk button while scanning and not within ten
(10)seconds of receiving a transmission, you will transmit on the channel on which you last received a transmission. This will return the radio to Standby mode.
If you do not press any button within ten (10) seconds, your radio will automatically resume scanning channels.
During Channel Scan (while not receiving a transmission), You Can Choose From The Following:
a. Press and hold the Talk button to communicate on the channel or channel/privacy code that was displayed before you entered mode functions or the channel on which, during scanning, you last received a transmission. This will return the radio
to Standby mode.
Mode Button
Scan Channels
To Scan Channels:
1.Press the Mode button until the Scan icon and the channel numbers flash on the display.
2.Press the Channel Up or Channel Down button to begin scanning channels.
The radio ignores specific privacy codes while scanning channels.
b. Press the Mode button to proceed to set privacy code scan on the channel that was either displayed before you entered mode functions or on which, during channel scanning, you last received a transmission (see page 10 for further details).
c. Press the Lock button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the channel on which, during scanning, you last received a transmission.
|
| The Scan icon will continue to be displayed when |
Channel Button | ||
|
| scan is On. Your radio will continue to scan all |
|
| channels and stop if an incoming transmission is |
|
| detected. Your radio will remain on that channel |
|
| for ten (10) seconds. |
|
| |
|
| While setting channel scan, if you do not |
|
| press any buttons for 15 seconds, your radio |
|
| will automatically return to Standby mode on |
|
| the channel or channel/privacy code displayed |
|
| before you entered mode functions. |
8 English
Nothing comes close to a Cobra® 9
