Operation
Mode Button
Hazards Radio Icon
Channel Button
Mode Button
Hazards Alert Icon
Channel Button
Using Your Radio
To Listen to All Hazards Radio Channels :
1.Press the Mode button until the Weather (All Hazards Radio) icon and the currently selected All Hazards Radio channel are displayed.
2.Use the Channel Up or Channel Down
button to change All Hazards Radio channels.
3.Weather (All Hazards Radio) icon will continue to be displayed when All Hazards Radio is On.
a.Press the Mode button to proceed to other functions.
b.Press the Lock button to exit All Hazards Radio channel mode and return to Standby Mode.
To Turn On All Hazards Alert:
1.Press the Mode button until the Alert icon flashes and the current On or Off setting is displayed.
2.Press the Channel Up or Channel Down button to turn All Hazards Alert On or Off.
3.Alert icon will continue to be displayed when All Hazards Alert is On.
a.Press the Mode button to enter the new setting and proceed to other functions.
b.Press the Lock button or do not press any buttons for 15 seconds to enter the new setting and return to Standby Mode.
c.Press the Talk button to keep original settings and return to Standby Mode.
Introduction
Mode Button
Scan Channels
Channel Button
|
|
|
|
|
Operation | Customer Assistance | Warranty |
|
|
Scan |
|
| • |
|
Your microTALK® radio can automatically scan |
| |||
main channels (1 through 22) or the privacy codes (00 through 38) within one (1) main channel.
To Scan Main Channels:
1.Press the Mode button until the Scan icon and the main channel number flashes on the display.
2.Press the Channel Up or Channel Down button to begin scanning the main channels.
The radio ignores privacy codes while scanning main channels.
3.The Scan icon will continue to be displayed when Scan is On. Your radio will continue to scan all main channels and stop if an incoming transmission is detected.Your radio will remain on that channel for ten (10) seconds.
During this time, you can:
a.Press and hold the Talk button and communicate with others. Your radio will remain on that channel and return to Standby Mode.
b.Press the Channel Up or Channel Down button to resume scanning channels.
c.Press the Mode button to proceed to privacy code scanning (see page 12 for further details).
If you press the Talk button while scanning, and not within ten (10) seconds of receiving a transmission, you will transmit on the last channel you transmitted or received on.
If you do not press any button within ten (10) seconds, your radio will automatically resume scanning main channels.
10English
Nothing comes close to a Cobra™ 11
