9508-PR255-2VP-D-FinalC #17 3/29/06 3:36 PM Page 12
Mode Functions
Operation
During scanning (while receiving an incoming transmission), you can choose from the following:
a. Press and hold the Talk button to communicate on that channel/privacy code. Your radio will remain on that channel/privacy code and return to Standby mode.
|
| Operation |
|
|
|
|
|
|
|
|
|
| |
| Introduction | Customer Assistance | Warranty |
|
|
Five Call Tone Settings
•
You can choose between five different Call Tone Settings to transmit a unique call alert.
Mode/Power Button To change a call tone setting:
b. Press the Channel Up or Channel Down button to resume scanning privacy codes.
If you press the Talk button while scanning and not within
10 seconds of receiving a transmission, you will transmit on the channel/privacy code on which you last received a transmission. This will return the radio to Standby mode.
If you do not press any button within 10 seconds, your
Call Tone Setting
1.Press the Mode/Power button until the letter “C” and the current call tone number (01 through 05) is displayed. The current call tone will sound for one second.
2. Press the Channel Up or Channel Down button to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode/Power button to
radio will automatically resume scanning privacy codes.
During scanning (while not receiving a transmission), you can choose from the following:
a. Press and hold the Talk button to communicate on the channel/privacy code that was displayed before you entered mode functions or the channel/privacy code on which, during scanning, you last received a transmission. This will return the radio to Standby mode.
b. Press the Mode/Power button to proceed to other functions.
c. Press the Lock button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the channel/privacy code on which, during scanning, you last transmitted or received.
12 English
Channel Buttonenter the new setting and proceed to other functions.
b. Press the Lock button to enter the new setting and return to Standby mode.
Roger Beep Confirmation Tone
•
Your listener will hear an audible tone when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak.
Mode/Power Button To turn roger beep on or off:
1. Press the Mode/Power button until the Roger Beep icon flashes. The current on or off setting is displayed.
2. Press the Channel Up or Channel Down
Roger Beep Off
button to select roger beep on or off.
3.Choose one of the following:
a.Press the Mode/Power button to enter the new setting and return to Standby mode.
Channel Button
b. Press the Lock button to enter the new setting and return to Standby mode.
Nothing Comes Close to a Cobra® 13
