.5. .6.
Power Operations To play a CD disc
Adapter Operations
Power is supplied through the provided appropriative power adapter (INPUT: 110/220V
OUTPUT: 6V 600mA), one end of which is connected to the DC IN jack on the main unit,
another to the wall outlet with AC110-220V.
Note:
a. If you have difficulty inserting the plug, turn it over and reinsert it.
b. If the unit will not be in use for long periods of time, disconnect the plug from the outlet.
c. In order to prolong the operation life, the intervals of continuous power on should be not
less than 30s.
Battery Operations (NOT INCLUDED)
This unit also operates on four (4) "C" size batteries. Open the battery cover and insert the
batteries in the battery compartment following the polarity diagram indicated inside.
AAA 1.5V
AAA 1.5V
UM-2X4 (R14,SIZE C) 6V
Back View
Battery Installations
Lock Mechanism:
To open the battery cover, turn the
lock mechanism till the direction
mark" " pointing at the OPEN
position, then open the cover by
hand.
To lock the battery cover, turn the
lock mechanism till the direction
mark" " pointing at the LOCK
position.
a. For the power supply of CD/RADIO/
ALARM CLOCK operations, insert
4"C" size batteries in the battery com-
partment.
b. The 2"AAA" size batteries are to be
put in the battery comparment for
clock back-up purpose in case of
power failure or breakdowns. Replace
the battery every six months for the
best performance.
Remove the batteries if the player will
not be in use for a long period of time.
WARNING:
The battery used in this device may present a fire or chemical burn hazard if mistreated.
Do not recharge, disassemble, incinerate, or heat the batteries about 100 C (212 F).
Use of another battery may present a risk of fire or explosion. Dispose of used batteries.
Do not dispose of fire.
Keep batteries out of children's reach.
LOCK
LOCK
Basic operations
1. Press the ON button to turn the unit ON.
2. Insert a CD disc into the CD compartment with label facing up.
3. Select CD function by turning the "AUTO/AL. CD. RADIO"
knob to CD position.
4. Press to start playing the disc.
5. Adjust the volume control to the desired volume level.
6. Press the STOP button to stop playback.
PLAY/PAUSE
Press once to start playing the disc from the first track.
The LCD displays the current track # and timer.
Press twice to stop the playing temporarily. The LCD displays
the flashing time of current track.
Press the button once more to resume normal playback.
STOP
Press once to stop the playback. The LCD displays the total track number
and total lasting time.
Press twice to access to STANDBY mode.
PREV/NEXT
To play a specified track
Press the PREV/NEXT button to skip to the previous/next track. Each time
you press the button, one track will be skipped.
Press and hold the PREV/NEXT button to fast backward/forward through the
disc. The track # and timer on the LCD keeps going backward/forward until
you release the button.
NOTE: Sound is muted during Fast Backward/Forward.
01 01:30