|
| (2) During play, press REW |
| button to play |
|
| |||
|
| |||
(3)LCD screen will display " Er " if the unit |
| previous track. |
|
|
can not read CD track data. |
|
|
|
|
Press REW button
(4) Press REW
button to start INTROplay from current or previous track.
RANDOM PLAY
(1)
(2)TO COMPLETE THE PROGRAMMING AND TO PLAY
Press POWER ON( 
) button to start the programmed tracks.
(3)TO CLEAR THE PROGRAMMING, Press POWER OFF(
) button.
Press and hold TUNING/FF(
) or TUNING/REW(
) button for about one second for fast setting.Fast setting rate: 8 steps per second.
SPECIFICATION
CD Play Section
90 DAYS LIMITED WARRANTY
COBY ELECTRONICS CORP.("COBY") warrants this product to the original purchaser to be free from defects in material or workmanship
(4)When CD track data has been read, LCD SCREEN will display the last track number with the total play time.
(5)Unit will start play from track No.1 automatically.
STOP
(1)Press POWER OFF (
)button to stop play , LCD screen will display the last track number.
PAUSE
(1)Press POWER ON button to pause on/off alternately, TIMER will flash.
LISTEN TO DESIRED TRACK
(3) During pause mode, press FF
(or RAW
) button to play the next track (or previous track).
MOVE TO THE DESIRED SPOT
(1)During play, press and hold FF
(or REW 
) button continuously to fast forward (or fast reverse) the current track.
REPEAT PLAY
(1) Press MODE button once to repeat one track.
(2) Press MODE button twice to repeat all tracks.
INTRO PLAY
(1) Press MODE button three times during play and "INTRO"will flash.
Press MODE button four times at STOP mode and "RANDOM" is displayed and flash.
(2) Press POWER ON( 
) button to play tracks in random order.
Or
(1) Select RANDOM mode during play and "RANDOM" will flash.
(2) Press POWER ON(
) button to play tracks in random order.
(3) To cancel RANDOM mode, press MODE or POWER OFF( 
) button.
PROGRAM PLAY
(1) TO PROGRAM
(a) Press PROG. button at stop mode and "PROG" and "00" will display.
ANTI-SKIP PLAY
Press ESP/BAND button to prevent disruption or stopping of CD player. LCD will display
at
(1)"
"is displayed when the battery voltage reaches low.
(2)When the voltage is too low, the unit will automatically turn off.
RADIO MODE
Slide RADIO/CD switch to RADIO position, press power on button to turn the radio power on.
LCD screen will display band and receiving frequency.
Band Selection
Once fast setting is proceeding onwards, release the key for auto tuning.
Auto tuning stops when Station Detection signal is received.
When the tuning reaches the band edge, it wraps around to the opposite end, and continues seeking onwards.
During auto tuning process, memory recalling or writing is not allowed.
Auto tuning can be stopped at once upon pressing TUNING/FF(
) or TUNING/REW(
) button.
Memory Recall
Press PRESET button.
Memory number will be shown.
Memory number remains on each time when memory is recalled. They will be blanked immediately when TUNING/FF or TUNING/REW button is pressed to alter the existing frequency.
Memory Writing
Press PROG. key once to initiate memory writing process. Memory set indicator "PROG " appears and flashes.
Press PRESET key once to enter the display frequency to the desired memory, and press memory key again thus terminate the writing process,Memory set indicator "PRESET" is shown frozen.
During the writing process. if no further valid key pressing is detected, the microprocessor will terminate the writing process after 5 seconds idling.The memory set indicator and memory number will be blanked. 
If always adjusting the desired frequency prior to memory writing process. It should be noted that once TUNING/FF or TUNING/REW
Frequency Response | ..............................20 ~ 20,000Hz |
Wow and Flutter | Below Measurable Limits |
Sampling Rate | 8 times over sampling |
D/A Converter |
RADIO Section
FM | 87.5- 108 MHz |
AM | 530 - 1720 kHz |
General
Maximum Output (Stereo Headphone)....20mW+20mW(32ohm)
Power Supply
AC Adapter | 110V 60Hz (not included) |
DC | 4.5V with DC Adapter |
| (AC adapter not included) |
| (Batteries not Included) |
Dimension | 5.1"x 1.1"x 5.6"(WHD) |
under normal use for 90 DAYS from the date of original purchase. COBY agrees under this warranty, to repair or replace it with a new or reconditioned product at no additional charge. Our warranty does not cover any product which has been subjected to neglect, unreasonable use, accident, violation of operating instruction or any product that has been repaired or modified by an unauthorized service agent. To obtain factory service, return this unit
COBY ELECTRONICS CORP.
Customer Service Dept.
56-65 Rust Street
Maspeth, N.Y. 11378
COBY'S liability under any legal theory for any loss damage in any way related to this product shall not exceed the sales price of this product. In no event shall COBY be liable for any incidental or consequential damages resulting from the use of this product, or inability to use this product. Repair or replacement as provided under this warranty is the exclusive right of the consumer.
(1) Press FF |
| (or REW |
| ) button to set the desired |
|
| (2) | Press POWER ON( |
| ) button to start | ||||||||
|
|
|
|
| ||||||||||||||
track#, press POWER ON ( |
| )button to play. Press |
|
|
| |||||||||||||
FF |
| (or REW |
| ) button to change the track# during |
|
|
| INTRO play from track No.1 | ||||||||||
|
|
|
|
| ||||||||||||||
the play mode. |
|
|
|
|
|
|
|
| ||||||||||
Press FF button |
|
|
|
|
| |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| (3) | Press FF |
| button to start INTRO | ||||
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| play from next tracks in random order. | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
(b) Press FF
(or REW
) button to select the track number.
(c) When desired track is displayed, press PROG. button to set.
(d)Repeat (b)~(c) to set up to 24 tracks. The display will show the current set track.
(e)Set tracks can be checked by pressing PROG. button.
Press BAND button once to toggle the band control from FM to AM.
Manual/Auto Tuning
Press TUNING/FF(
) or TUNING/REW(
) button to increase or decrease the existing frequency by one step.
Upon reaching the band edge, it wraps around to the opposite end.
key is pressed, the memory writing process will be terminated and the memory number will be blanked.
Other functions:
Stereo indicator: stereo indicator lights up on receiving FM stereo signal from RF band.
Last AM and FM frequency and memory can be preserved if the time of replacing the batteries and converting to CD mode not more than 30 seconds.
Weight | 0.66lbs (Main Unit Only) |
Accessories Included | Professional High Performance |
| Digital Neck Band Headphones |
Except for the extent prohibited by law, no express or implied warranty of merchant ability or fitness for a particular purpose on this product shall be extended beyond the period of this warranty. Some States prohibit the exclusion or limitation of incidental or consequential damages, so that the above limitation or exclusion may not apply
to you. This warranty gives you specific rights, and you may also have other rights which may vary from State to State.
SLIM PERSONAL CD PLAYER AM/FM STEREO RADIO AND 45 SEC
Instruction Manual
NAME OF PARTS
| DOOR OPEN switch | |
LCD Display | MODE button | |
| ||
ESP/BAND button | PLAY/POWER ON | |
PROGRAM button | botton | |
| ||
STOP/POWER OFF | Hold switch(on | |
button | ||
rear) | ||
| ||
TUNING/REW | DC jack | |
| Headphone jack | |
| Volume Control | |
| CD/RADIO switch | |
PRESETS | TUNING/FF | |
| DBBS switch |
INTRODUCTION
Please read and follow the instruction manual carefully before operating in order to avoid any damages to the unit. Any adjustment or repair should be done by a qualified service center only to receive warranty.
BATTERY OPERATION (BATTERIES NOT INCLUDED)
Your unit operates on two(2) AA size alkaline batteries. Open the CD cover and insert the batteries in the battery compartment following the polarity diagram located inside.
You can operate this unit with two "AA" rechargeable batteries. For new or exhausted rechargeable batteries, we recommend that (Refer to battery manufacturer's guide)
When operating the unit with AC adapter and
1.Open the CD cover and insert the batteries (2x"AA") in the battery compartment following the polarity diagram located inside.
BOTH BATTERIES MUST BE RECHARGEABLE NiCd
TYPES. OTHER BATTERIES MAY EXPLODE OR LEAK.
2.Plug in AC adapter and slide the "CHARGE SWITCH"
to "ON" position to start charging.(AC adapter not included)
3.Unplug the AC adapter after charging.
DO NOT CHARGE THE BATTERIES MORE THAN 24 HOURS OR MORE THAN RECOMMENDED TIME. OVERCHARGING MAY DETERIORATE THE PERFORM- ANCE OF THE RECHARGEABLE BATTERIES.
4.If the operating time decrease drastically after the batteries have been recharged properly, purchase new rechargeable NiCd batteries.
Do not attempt to recharge alkaline batteries. This may cause leakage and damage to the unit.
Do not mix alkaline batteries with rechargeable batteries.
MONEY SAVING TIPS.
Due to the nature of CD technology, the unit uses power even when the unit is off. To extend the batteries' life, use the adapter for indoor operation or where power is supplied. Use the battery operation only when the unit is in mobile.
DBBS FUNCTION
The Dynamic Bass Boost System(DBBS) enhances the low frequency(Bass) response of the output. Set the
Volume to low listening level and press DBBS switch in the direction of the arrow to turn this function ON.
Note: Some CD's with DBBS may exceed the bass response capacity and can cause distortion. Do not play DBBS in high volume. Playing DBBS in high volume may cause damage to the headphone and more importantly to your hearing.
HOLD FUNCTION
This HOLD function prevents any unwanted function changes during PLAY or STOP mode. Slide HOLD switch to the arrow direction (or opposite) to turn the function ON (OFF). No other function buttons operate on HOLD mode, except DBBS function.(except radio function)
CAUTION
Hearing experts advise against the constant use of personal stereo played at high volume. Constant high volume use can lead to hearing loss. If you experience ringing in the ears or hearing loss, discontinue use and seek medical advice.
To remove the disc from its storage case, press down on the center of the case and lift the disc out. Hold it carefully
Insert the disc into the unit with the label of the disc facing up.
Gently wipe the disc using a soft cloth from the center to the outer direction to remove dust, fingerprints or any other particles on the disc surface. Never use chemicals, such as record sprays,
To avoid serious scratches on CD, keep them in the cases after each use. Scratches can cause the laser
Do not place stickers or write anything on the disc.
Read the instruction manual before operating this unit.
Do not expose the unit to high temperature or humidity. Use dampened soft cloth to clean the unit. Do not use
strong detergent or solvent to clean the unit.
Ensure that all electrical connections(including the main plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacture's instructions. 
Consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
IMPORTANT
The CD mechanism and the sensitive circuitry may cause interference to a radio tuner nearby. Do not operate this unit while operating other radio devices.
Danger | This product utilizes invisible laser | |||
| radiation. Avoid direct exposure |
|
|
|
|
| |||
| to the beam. |
|
| |
|
| |||
Caution | Use of controls, adjustments or procedures | |||
| not listed in this manual may result in | |||
| hazardous radiation exposure. | |||
CONCERNING COMPACT DISCS
Only compact discs identified with this mark can be used with this player.
CD MODE
POWER ON 
AUTO PLAY
(1)Slide the CD/RADIO switch to CD position.
Press POWER ON
button to turn the power on. LCD screen will display :
(2)LCD screen will display " NO DISC", if CD is not in the unit.
