GETTING STARTED
Preparing the CR-A149 for Use
Plug the clock into an AC 120V outlet.
Press the RESET button located on the rear of the clock. Upon reset- ting the clock:
The display will light up and flash
The temperature will be displayed for 4 seconds
The remote unit will search for the 433MHz transmission signal in 5 minutes
The main unit will start searching for the RCC (Radio Controlled Clock) signal automatically. The RCC signal will synchronize your clock’s time and date (including Daylight Savings Time).
An animated antenna dish icon indicates that the unit is search- ing for a signal.
The antenna dish icon indi- cates that a signal has been received.
The unit will stop searching after 10 minutes if a signal cannot be received
It will take up to 10 minutes for the signal to synchro- nize the clock time.
RCC synchronization may be turned on or off by holding the snooze button for 3 seconds.
For best results, place the RCC antenna near a win- dow with a clear view of the sky. Keep the RCC an- tenna away from metal or electrical objects.
www.cobyusa.com | Page 11 |
|
|
