POWER SOURCE

BATTERY OPERATION

.Open the battery cover.

.Insert 2 “AA” size (National UM-3 or equivalent batteries into the Battery Compartment, making sure that the batteries are installed in the designated numerical order and that the proper polarities (+ and -) are maintained.

To prevent possible damage to this unit:

*Load new batteries with their polarities (+ and -) aligned cor- rectly.

*Do not apply heat to batteries, or internal short-circuit may occur.

*If this unit is not to be used for a long period of time, remove all batteries and store them in a cool and dry place.

*Remove spent batteries immediately and dispose of them.

*Do not use old and new batteries together. Also never use an alkaline battery with a manganese battery.

*Battery life

If the sound becomes low or distorted, replace all the batteries with new ones.

RADIO OPERATION

.Rotate the VOLUME Knob anti-clockwise to turn radio on and adjust to desired sound level.

.Select the preferred wave range (FM/AM/SW) by sliding the Band Knob. The selected wave range will appear on the display.

.Rotate the Tuning Knob to tune in desired station. The display shows the frequency.

.Adjust the antenna (See ANTENNAS).

.Press Power knob to turn off the radio.

Note: Press the ALARM on/off knob to turn off the radio.

-  -

Page 2
Image 2
COBY electronic CX-CB91 operating instructions Power Source, Radio Operation, Battery Operation