R
PORTABLE CD PLAYER
CX-CD1112
RAND
1
ALL INTRO RND
HOLD
PROG
Charge switch
DC jack
Hold switch
RANDOM button
PROG button |
|
MODE button | RAND |
LCD Display
Play/Pause button
DBBS switch
Headphone jack
Volume control Open door lock
BATTERY OPERATION (BATTERIES NOT INCLUDED)
Your unit operates on two(2)AA size alkaline batteries. Open the battery compartment cover and insert the batteries in the battery compartment following the polarity diagram located inside.
RE-CHARGEABLE BATTERY OPERATION (BATTERIES NOT INCLUDED)
You can operate this unit with two "AA" rechargeable batteries. For new or exhausted rechargeable batteries, we recommend that batteries are recharged for 15 hours before use.
(Refer to battery manufacturer's guide)
When operating the unit with AC adapter and
1.Open the battery compartment cover and insert the rechargeable batteries (2 x "AA" )in the battery compartment following the polarity diagram located inside
BOTH BATTERIES MUST BE RECHARGEABLE NiCd TYPES OR THE BATTERIES MAY EXPLODE OR LEAK.
3. Unplug the AC adapter after charging.
DO NOT CHARGE THE BATTERIES MORE THAN 24 HOURS OR MORE THAN RECOMMENDED TIME. OVERCHARGING MAY DETERIORATE THE PERFORMANCE OF THE RECHARGEABLE BATTERIES.
4.If the operating time decreases drastically after the batteries have been recharged properly, purchase new rechargeable NiCd batteries.
Do not attempt to recharge alkaline batteries . This may cause leakage and damage to the unit.
Do not mix alkaline batteries with rechargeable batteries.
Do not leave the batteries on recharge for long periods of time. This can damage the performance of the cells.
Due to the nature of CD technology, the unit uses power even when the unit is off. To extend the batteries' life, use the adapter for indoor opera- tion or where power is supplied. Use the battery operation only when the unit is in mobile.
The Dynamic Bass Boost System(DBBS) enhances the low frequency(Bass) response of the output. Set the Volume to low listening level and press DBBS switch in the direction of the arrow to turn this function ON.
Note: Some CD's with DBBS may exceed the bass response capacity and can cause distortion. To avoid this, do not play DBBS in high volume. Playing DBBS in high volume may cause damage to the headphone and more importantly, to your hearing.
Hearing experts advise against the constant use of personal stereos played at high volume. Constant high volume use can lead to hearing loss. If you experience ringing in the ears or hearing loss, discontinue use and seek medical advice.
To. remove the disc from its storage case, press down on the center of the case and lift the disc out. Hold it carefully by the edges as shown below.
direction to remove dust, fingerprints or any other particles on the disc surface. Never use chemicals, such as record sprays ,
To avoid serious scratches on CD, keep them in the cases after each use. Scratches can cause the laser 
Do not place stickers or write anything on the disc.
Read the instruction manual before operating this unit. Do not expose the unit to high temperature or humidity.
Use dampened soft cloth to clean the unit. Do not use strong detergent or solvent to clean the unit.
Ensure that all electrical connections (including the main plug,
FF 
button
REW
button
Stop button
1
2.Plug in AC adapter and slide the "CHARGE SWITCH" to "ON"
position to start charging | This HOLD function prevents any unwanted function changes during PLAY |
USE ONLY THE AC ADAPTER SUPPLIED WITH THE UNIT FOR | or STOP mode. Slide HOLD switch to the arrow direction (or opposite) to |
CHARGING. | turn the function ON (OFF). No other function buttons operate on HOLD |
| mode, except DBBS function button. |
Insert the disc into the unit with the label of the disc facing up. 
Gently wipe the disc using a soft cloth from the center to the outer
extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacture's instructions.
Consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment
The CD mechanism and the sensitive circuitry may cause interference to a radio tuner nearby. Do not operate this unit while operating other radio devices.
Danger | This product utilizes invisible laser |
(4)LCD screen shows "Er" if the unit can not read CD track data.
(5)When CD track data has been read.
(1) Press FF | (or REW | )button to select the |
desired track# . Press PLAY/PAUSE | ||
(1) Press MODE button once to repeat one track.
(2) Press MODE button twice to repeat | ALL |
| |
all tracks. |
|
(1) TO PROGRAM
(a)Press PGM button at stop mode and "PROG" will display and flash.
PROG
(1) 
is displayed when the battery voltage reaches low.
PROP. 65 WARNING:
Handling the coated electrical wires of this product exposes you to lead, a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
Wash hands after use.
| radiation. Avoid direct exposure to |
|
|
|
|
|
| ||||
| the beam. |
|
|
| |
|
| ||||
Caution | Use of controls, adjustments or procedures not listed in | ||||
| this manual may result in hazardous radiation exposure. | ||||
COMPACT
Only compact discs identified with this mark can
be used with this player. | DIGITAL AUDIO |
|
(1)Press PLAY/PAUSE (
)button to turn on the power.
(2)LCD shows"
"and then total number of all the tracks.
Unit will start play from track No.1 automatically.
Press STOP(
)button to stop play, and the last track number will display.
Press PLAY/PAUSE( 
)button to pause on/off alternately.
Timer will flash on pause mode.
Press PLAY/PAUSE button again, then the the unit displays continually and plays the current track .
button to play. Press FF | (or REW | ) | Press FF button |
|
|
|
button to change the track # during the play mode.
(2) During play, press REW 
button to play previous track.
Press REW button at the head of NO.4
(3) In pause mode, press FF 
(or REW 
) button to play the next track (or previous track). The unit will keep in pause mode.
During play, press and hold FF
(or
INTRO PLAY
To listen to the first 10 seconds of each track.
(1)Press MODE button three times and INTRO will flash.
(2)Press PLAY button to start INTRO from track No.1.
(1)Press RAND button to play tracks in random order. RND will flash.
(2)Press PLAY/PAUSE (
) button to play tracks in random order.
(3)Press FF
button to play tracks in random order.
(4)During RANDOM mode, press MODE button one time can repeat one track. RND and 
1 will flash.
(4)During RANDOM mode, press MODE button two times can repeat all tracks. RND and 
ALL will flash.
INTRO
RND
RND
1RND
ALL RND
(b) Press FF (or REW | ) button to select |
the track number. |
|
(c) When desired track is displayed, press | |
PGM. button to set. |
|
(d) Repeat (b)~(c)to set up | 20 tracks. |
The display will show the current set track. | |
(e) Tracks set can be checked by pressing | |
PROG. button. |
|
(2) TO COMPLETE THE PROGRAMMING | |
AND TO PLAY |
|
Press PLAY/PAUSE ( | )button to start the |
programmed tracks. |
|
(3) TO CLEAR THE PROGRAMMING | |
PROG
(2)When the voltage is too low, the unit will automatically turn off.
General
Maximum Output (Stereo Headphone..15mW+15mW(32ohm)
Single Output | ........................................0.6V, 47kohm |
AC Adapter | 120V 60Hz(not included in |
DC | 4.5V with DC Adapter |
| 3V with 2 size "AA" Batteries(not included) |
(3)LCD shows NO DISC when CD is not in the unit.
REW ) button to fast forward (or fast reverse) to the current track.
(5) To cancel RANDOM mode, press RAND or STOP (
)button.
Press STOP( )button. |
