SAFETY INSTRUCTIONS (Cont.)
1.Read these instructions carefully. Keep these instructions for future reference.
2.Heed all warnings and follow all instructions.
3.Do not expose to water or moisture.
4.Clean only with a dry cloth.
5.Keep objects away from ventilation openings. Do not block ventilation openings at any time.
6.Do not install near any apparatus that produces heat such as stoves, radiators, amplifiers, etc.
7.Do not force the power plug into a wall outlet. If the plug provided does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. (A polarized plug has two blades where one is wider than the other; the wide blade is provided for your safety.)
8.Do not place heavy objects on the power cord. Protect the cord from being walked on, pinched by objects, or torn and exposed to liquids (especially at plugs, convenience receptacles, and the point at which they exit from the device).
9.Use only with attachments/accessories specified by the manufacturer. Use of attachments/ accessories not recommended by the product manufacturer may be hazardous.
10.Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the device. If a cart is used, use caution when moving the cart/device combination to avoid injury from tip over.
11.Unplug the unit during lightning storms. Unplug the device and remove any batteries when the device will be unused for long periods of time.
12.Do not use headphones/earphones at high volume.
13.Do not open or attempt to repair this device. Refer all repairs to authorized service personnel.
Positioning the Unit:
•The ventilation openings should not be impeded by covering them with items such as news- papers, table cloths, curtains, etc. Do not stand the unit on a thick pile carpet or otherwise install it in a place with inadequate air flow.
•Do not use the unit in excessively hot, cold, dusty, damp, or humid locations.
•Condensation may form inside the CD player if the unit is left anywhere warm and damp, or if you move the unit from a cold location to a warm room. In this case, let the unit stand for 1 to 2 hours or gradually increase the room temperature so that the unit will be dry before use.
•Place the unit on a flat, even surface.
•Do not place the unit where it is subject to vibration.
- -
