COBY electronic TF-DVD8500 operating instructions Unpacking

R

TF-DVD8500

Please read this manual before connection and use.

Important Safety Instruction

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Please carefully study this manual and always keep it available. There are, however, some installation and operation precautions which you should be aware of .

(1)Read these instructions-All the safety and operating instructions should be read before the product is operated.

(2)Keep these instructions-The safety and operating instructions should be retained for future reference.

(3)Heed all warnings-All warnings on the product and in the operating instructions should be adhered to.

(4)Follow all instructions-All operating and use instructions should be followed.

(5)Do not use this apparatus near water-The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

(6)Clean only with dry cloth-Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Clean only with dry cloth.

Exception: A product that is meant for uninterrupted service and that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the product in the cleaning description otherwise required in 131.8(5)

7)Do not block any ventilation openings. Install in accordance with the manufacturer's instruction-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to .

(8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

(9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

(10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

(11)Only use attachments/'accessories specified by the manufacturer. Do not use attachments not recommended by the product manufacturer as they may cause hazards.

(12)Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the appa- ratus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Important Safety Instruction Continued

(13)Unplug this apparatus during lightning storms or when unused for long periods of time. Unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

(14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

(15)Power Sources- This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

(16)Protective Attachment Plug-The product is equipped with an attachment plug having overload protection. This is a safety feature. See instruction manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.

(17)Outdoor Antenna Grounding- If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information with regard to proper grounding conductors, location or antenna- discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

(18)Power lines- An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

(19)Overloading- Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

(20)Object and Liquid Entry- Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

(21)Servicing -Do no attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

(22)Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric, or other hazards.

(23)Safety Check- Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: SHOCK HAZARD-DO NOT OPEN

AVIS: RISOUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons.

. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Dangerous high voltage is present inside the enclosure. Do not open the cabinet.

CAUTION: To prevent electric shock, match wide blade plug to wide slot, and fully insert.

CAUTION: This Digital Video Disc Player employs a laser System. To prevent direct exposure to the laser beam, do not try to open the enclosure. When open and the interlocks are defeated, visible laser radiation is present.

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. DO NOT STARE INTO BEAM.

FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device. Pursuant with the FCC Rules,Part 15. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction may cause harmful interference to radio communication.

NOTICE: This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Table of Contents
IMPORTANT SAFETY INSTRUCTIONS	Page
SAFETY INFORMATION
TABLE OF CONTENTS
UNPACKING	1
NOTE ON DISC	2
IDENTIFICATION OF CONTROLS	3-5
CONNECTIONS(Connecting to a TV)	6
CONNECTIONS(Connecting to an amplifier	7
equipped with a Dolby Pro
Logic Surround)
PREPARATIONS BEFORE OPERATION	8-10
PLAYING A DISC	11
FUNCTION BUTTONS	12-15
SETUP MENU	16
CUSTOM SETUP	17
TROUBLE SHOOTING	18
SPECIFICATIONS	19

Unpacking Note on Disc Identification of Controls Identification of Controls Identification of Controls

Please make sure the following items are included with your DVD player. If any items are

Disc Requirement

Main Unit

Main Unit

Title

Display

missing, contact your dealer.

The DVD player can play back the following discs.

Power

LCD Mode

Disc mark

Contents

Disc size

Maximum playback time

Setup

DVD video

Audio+Video

133 min (SS-SL)

Menu

Play/Pause

12cm

242 min (SS-DL)

Enter

discs

(moving picture)

266 min (DS-SL)

Stop

Mute

484 min (DS-DL)

Direction buttons

Audio

Mute

Zoom

Audio CDs

12cm

74min

Mute

In addition, this unit can play back a CD-R, or CD-RW that contains audio titles or MP3 files.You cannot playback discs

SPEAKER

TFT LCD

PREV/NEXT Skip

other than those listed above.(CD-ROM, CD-Extra, CD-G, and CD-l discs can not be played on this DVD player.)

Clear

Step

Care of Disc

Numeric buttons

FF/FR Search

DVD Player

LCD MODE

LCD M ODE

PREV

Step

Remote Control

Video disc contains high-density compressed data that needs proper handling.

TITLE

PREV

NEXT

Clear

Step

AV switch

DISPLAY

NEXT

Slow

Hold the disc with fingers. Hold the disc's outer edge and/or the center spindle hole.

VIDEO

STOP

Repeat A-B

RETURN

PBC

POWER ON

PHONE jack

PLAY/PAUSE

Do not touch the disc surface.

R ET U R N

Repeat

Program

indicator

Remote

OPTICAL/AUDIO

MENU

Audio

Sensor VOLUME control

SLOW

ENTER

DIRECTION / ENTER

SubTitle

Angle

S LOW

OPEN

Remote Control

DISC lid

SETUP

Battery

DC Car Cord

Do not bend or press the disc. Do not expose the disc to direct sunlight or heating sources.

NOTE:

Place a disc with label facing up, and push gently on the center of the disc so it goes into position.

To start playing, press the ENTER button. To stop playing, press the STOP button.

To Skip Forward/Skip Backward, press the PREV/NEXT

/ .

Store discs in cabinet vertically, and in dry condition. Prevent exposure to :

To Fast Forward/Fast Backward, press and hold the PREV/NEXT button for about two seconds.

Power ON LED status:

Direct sunlight

Heat or exhaust from a heating device.

It is green under normal playback. It is red under STANDBY mode.

AC/DC Adapter

Extreme humidity.

Power Cord

Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc surface gently and radically from center

Swivel Panel

You can swivel the panel to a suitable viewing angle.

toward the outer edge.Do not apply thinner, alcohol , chemical solvent, or sprays when cleaning. Such

cleaning fluids will permanently damage the disc surface.

DC 9V IN

POWER Switch

By180o

PHONE Jack

AV Cable

Headphones

.1.

.2.

.3.

.4.

.5.

Connections

Preparations before Operation

Preparations before Operation

Preparations before Operation

Playing a Disc

Power Connections

AC Adapter

Power Connections

Battery Pack

Basic Playback

Connecting to an amplifier equipped with a Dolby Pro Logic Surround with optical input

Insert the battery

Remote Control

For new or exhausted rechargeable battery pack, we recommend it be charged

Prepare the power supply.

1. Open the cover of the DVD player by hand.

for 4 hours.

Slide the POWER switch to the left to turn

Amplifier equipped with a Dolby Pro Logic Surround

Attaching the battery pack

the unit on.

1.

Match the hooks of the battery pack into the holes on the rear of the player.

2. Load a disc

POWER switch

2.

Press and slide the battery pack until the hooks click.

Press OPEN button to open the disc lid and insert

To the DC inlet

a disc with the label up. Close the disc lid by hand.

OPEN button

If the single sided disc is placed in upside down, "NO DISC" or "BAD DISC" will appear on the TV screen.

After playing back all of the chapters in the title, the DVD player stops automatically and shows the menu screen.

3. Start playback

AC adapter:

Press PLAY button to start playing. (Some discs may play automatically).

This AC adapter operates on

100--240V~~50/60Hz 2A

If a DVD disc menu appears on screen

DC OUT: 9V

Optical cable

AC adapter

DC current: 2.0A Min

Press the DIRECTION buttons to select the desired feature in the menu.

To wall outlet

Press ENTER button to confirm a selection in the menu.

Li-ion Polymer Rechargeable Battery pack

4. Adjust the volume

7.4V 3000mA/h

Note:

Turn the volume control on main unit to the desired volume level.

1. Refer to the diagram. Open the battery compartment of the remote control. Insert batteries,

then close the

* The battery pack can be recharged for about 300 times without obvious performance dropped.

Problem disc messages

compartment.

Caution:

2. To use the remote control, point it at the remote sensor of the unit and operate in the range of 5 meters and

The following message will be displayed on screen when there is a format problem with loaded disc:

To AUDIO OUT jack

Do not connect the power plug to a power outlet other than that indicated on the label, as this

at angle of 60.

Battery LED Indicator

3. Generally, the batteries last for about one year. Replace the batteries if the remote control does not work.

can result in a risk of fire or electric shock.

"WRONG REGIONAL DISC"

4. Remove the batteries if remote control will not be in use for a long period of time.

Do not connect or disconnect the power plug with wet hands. Doing so may cause electric shock.

Region code of the disc is not matching to the player's (region 1 to region 6)

"WRONG PASSWORD"

Warning: The battery used in this device may present a fire or chemical burn hazard if mistreated.

Do not use an AC adapter other than one specified, as it can cause a fire or damage

The rating level of the disc is higher than the rating level setting of the player.

to the player.

The player will not play the disc.

Do not recharge, disassemble, incinerate, or heat about 100 C(212 F)

Use of another battery may present a risk of fire or explosion. Dispose of used batteries.

"WRONG DISC"

With a receiver equipped with Dolby Digital

Keep batteries away from children. Do not disassemble or dispose of fire.

The player is equipped with automatic disc quality detection software. When the player detects a problem or damaged

Battery Recharge Jack

Battery Release Button

disc, the unit may play the disc at a lower quality or stop completely, depending on the damaged level of the disc.

Connect the equipment. Refer to receiver's owner'

* When the battery pack is connected, you can insert the AC adapter to either the DC in jack or

Production qualities of DVD discs vary. Some discs may deviate from the industry

standard. Some incorrectly formatted discs may be played. However, the playback and

the battery recharge jack for both playing and charging.

operational quality may be substandard.

When in charging, the battery LED indicator is red. And it will turn to green after fully charged.

POWER management

NOTE: When battery voltage reaches low, the unit will access to STANDBY mode auto-

matically.

If the player will not be in use for a long period of time, please push power switch to OFF position.

.7.

.8.

.9.

.10.

.11.

Function Buttons	Function Buttons
		Function Buttons	Setup Menu	Custom Setup

Connections

Connecting to a TV set

(TV or monitor with audio/video input)

To VIDEO OUT

To AUDIO/VIDEO input

To AUDIO OUT

Audio/Video cable(Supplied)

NOTE:

1.Refer to the owner's manual of your TV as well.

2.Before connecting the DVD player to a TV set, be sure to turn the power off and unplug both units from the wall outlet.

.6.

Function Buttons

LCD Mode

To adjust the Brightness, Contrast, and Color of the TFT panel.

LCD Press the LCD Mode button, the screen shows:

Mode

SCREEN	16:9
	RESET

Press UP/DOWN button to select the desired item and make adjustment by LEFT/RIGHT button. When the SCREEN is selected, press LEFT/RIGHT button to select 16:9 or 4:3

When the RESET is selected, press ENTER to confirm. The three items will be reverted to the default settings.

Display

Press Display button to show current status.

To quit display mode, keep pressing Display button till information disappears from the screen.

Under AV IN mode (Slide the AV switch to IN position), press the Display button to shift the TV SYSTEM between NTSC and PAL.

Play/Pause/Stop

Press Play button for the first time to play the disc.

Press the button for the second time to pause playing. (Still picture). Press again to resume playback.

Press the STOP button once, to stop playback.Press the PLAY button to resume. Disc will begin playing from where it was stopped.

Press the STOP button twice, to stop playback. Press the PLAY button to resume.Disc will begin playing from the beginning.

Skip Forward/Backward

Press the button to skip advance DVD chapter or CD track

Press the button to skip backward DVD chapter or CD track

NOTE: Player will not skip forward or backward during "WARNING" section of a DVD disc. Single chapter DVD or single track CD cannot be skipped.

Fast Forward/Backward

Press the button to fast forward through the disc. Repeatedly pressing the button will increase the search

speed. Normal x2 x4 x8 x16 x32

Press the button to fast backward through the disc. Repeatedly pressing the button will increase the search speed.

Press PLAY to resume normal playback.

NOTE: The player is muted in fast forward or fast backward mode.
Slow	The player will not fast forward or fast backward during WARNING section of a DVD disc.
	Press SLOW button to play at slow motion. Repeatedly pressing the button will decrease the slow speed.
Slow
	Normal	x1/2	x1/4	x1/8	x1/16	x1/32

NOTE: The player is muted at SLOW mode.

.12.

Trouble Shooting

Specification

Disc MENU/TITLE

Title While playing a DVD, press the TITLE button to return to the DVD disc start menu.

In DVD mode
Pressing the Search button once appears:	Pressing the Search button twice appears:

Audio	While playing a DVD disc, press AUDIO button to select the language of the audio sound track.
	A DVD disc may contain up to 8 selectable audio sound tracks.

Various features of the DVD player can be adjusted	(SETUP MENU)
in the SETUP menu.

Press the direction keys to highlight the desired Custom item. (Parental Ctrl, Password, Angle Mark, Default)

Should your DVD player develop a problem, please check below before requesting service:

Power supply DC 9.0V 2A (AC adapter TERMINAL)

Menu While playing a DVD, press the MENU button to return to the beginning of theTitle menu. NOTE: Some DVD discs do not allow the TITLE function.

Select an item in the menu

In the DVD disc start menu or in the Set Up menu

Press DIRECTION buttons to highlight function icons.

Press ENTER button to confirm a selection.

Clear Press CLEAR button to cancel an entry.

Press the RETURN button on main unit to return to the upper level menu.

Numeric Key Pad (Random Program access)

1). To directly access a DVD Chapter or a CD track, input the desired DVD Chapter or CD Track number using the numeric key pad.

2.) Input data for the DVD disc start menu or the player's setup menu.

NOTE: Some DVD discs do not allow direct access function.

MUTE

Mute Press MUTE button to select mute on or mute off.

ZOOM

PLAYING DVD

Zoom Press the ZOOM button repeatedly and the TV screen will display:

ZOOMx2 ZOOMx4 ZOOMx1

PLAYING JPEG

Press the ZOOM button repeatedly and the TV screen will display:

Press Right/Left button to select the desired item, and input desired Title, Chapter, Time or Track by the numeric button.

Press Play button to execute the search, or press Search button for the third time to quit the Search menu.

NOTE: Some DVD and MP3 discs do not allow the Search function during program playing.

Repeat Section A-B

To repeat playback a specific section of a disc.

Press the A-B button at the starting point of the desired section. "Repeat A" appears on screen. A-BPress the A-B button again at the end of the desired section. "Repeat A-B" appears on screen.

The player will start repeating playback the selected section from A to B until the function is cancelled. To cancel the function, press the A-B button for the third time to return to normal playback.

NOTE: Some DVD discs do not allow the A-B function playback. This function does not apply to MP3 discs.

REPEAT

This function allows repeated playback of a Title, Chapter or Track.

Repeat	Press REPEAT button repeatedly to select the repeat mode.
		In DVD mode		In CD/MP3 mode
		CHAPTER	Repeat chapter	TRK	Repeat track
		TITLE	Repeat title	DISC	Repeat disc
		DISC	Repeat all disc	OFF	Repeat off
		OFF	Repeat off
NOTE:	Some DVD discs do not allow REPEAT function.
STEP	Press STEP when playing, it can step frame by frame.
Step

NOTE: Some DVD discs do not have multiple ANGLES, SUBTITLES or AUDIO features.

SETUP

Press the SETUP button to enter the player's setup menu.

Setup The SETUP menu allows the viewer to adjust the setting details of the DVD player.

Please read the "SETUP menu" of the manual for further directions on how to use the SETUP menu.

PROGRAM

To play a disc in a desired sequence.

NOTE: The Program function is available just as the player is in Navigate Off mode. Press the PBC button to set Navigate Off.

Pro-	Press Program button to enter the program menu.
gram

In DVD mode
a. When the Program menu appears, move the cursor to highlight
the title column by LEFT/RIGHT button, select the Title by			Title Chapter
UP/DOWN button and press ENTER. Or input the title number by
the numeric keypad.
b. Move the cursor to highlight the chapter column by LEFT/RIGHT
button,select the Chapter by UP/DOWN button and press ENTER.
Or input the chapter number by the numeric key pad directly.
c. Repeat step a to b to set up to 20 titles for the programming
playback.
d. Press PLAY to start playing the programmed titles.
In CD mode			TRACK
a. When the Program menu appears, move the cursor to highlight the
column by LEFT/RIGHT button, select the Track by UP/DOWN
button and press ENTER.
b. Repeat Step a to set up to 20 tracks for the programming playback.
c. Press PLAY to start playing the programmed tracks.
In MP3 mode
a. When the Program menu appears, Press the
LEFT/RIGHT direction button to move to the folder column
(left colume) and press UP/DOWN direction button to select	DIR 001	1	FILE 001	1
desired foloder			FILE 002	2
	DIR 002	2
c. Press LEFT/RIGHT direction button to move to track column			FILE 003	3
(right colume) and press UP/DOWN direction button to select	DIR 003	3

1.	Press SETUP button, then the SETUP menu appears
	on screen.
2.	Press the UP/DOWN button to highlight the desired
	menu.
3.	Press ENTER button to confirm your selection.
4.	Press SETUP button again to quit the SETUP menu.
NOTE:		:Move :Select SETUP:Ouit
Make sure the player is in STOP mode before setting the
SETUP menu.

Language Setup

Press the Direction keys to highlight the desired LANGUAGE item.

Item	Instruction	Default setting
OSD	To select the language of the OSD.	English
Menu	To select the language of the Menu.	English
Audio	To select the language of the audio sound track	English
Subtitle	To select the language of the subtitle.
	When OFF is selected, the subtitle will not be displayed.	English

Screen Setup

Press the Direction keys to highlight the desired SCREEN item.

Item	Instruction		Default setting
TV Type	To select the TV screen size from:		16:9
	4:3 PS (Pan Scan); 4:3 LB (Letter Box); 16:9 (Wide Screen)
Screen Saver	To set Screen Saver function ON or OFF.		ON
TV System	To select the TV system from:	NTSC; PAL; AUTO	NTSC
Brightness	To select the brightness from:	Normal; Bright; Soft	NORMAL
Contrast	To select the contrast level from:-4;-3;-2;-1; 0; 1; 2; 3; 4		0

NOTE:

Certain DVD discs are formatted in wide screen (16:9) or letter box (4:3) only. Adjusting the setting of the disc player will not change the screen size for these "Format-only" discs.

A). Parental Ctrl

There are eight levels of Parental Control. Level one opens discs to people of all ages. Level eight is suitable only for adults.

To change the parental control setting, a 4-digit code is required to be input first. (The default code is 8888.) When the input code is confirmed, the level setting menu will appear. Select the appropriate level by the UP/DOWN button, and press ENTER to confirm.

B). Password

Move the cursor to the PASSWORD prompt and press ENTER. Input the password 8888 if it is the first use. After confirmation, you will be required to input a new 4-digit code, and verify again.

WARNING:

Please keep a copy of the new password in a safe place. Otherwise, you will not be able to change the Parental Control.

Please remember your password, as the DEFAULT setting will revert everything BUT the PASSWORD to the factory defaults.

C). Angle Mark

Choose between ON and OFF.

When the Angle Mark function is ON, an icon will be displayed on screen if the disc has multiple angle shots available for viewing.

Press ANGLE on the remote control to enjoy these scenes.

D). Default

This function allows you to change the player back to the factory default settings. All settings will be changed back to the original settings except the Password.

Symptom

No power

Does not play

No Picture

Picture noisy/ distorted

No sound or sound output not complete

Remote control does not work

Check and Action

1.Make sure the unit has been powered on manually.

2.Check if the power cord has been properly connected to the power outlet.

3.Make sure the battery pack is fully charged.

1.No disc, load a disc.

2.Disc has been loaded upside down. Place the disc with the label side up.

3.Disc's rating level is higher than the player's setting.

4.Disc is incorrect type for the player.

5.Disc is damaged or dirty. Clean the disc or try another one.

6.Moisture may be condensed inside the player. Remove the disc and leave the unit power on for one or two hours.

1.Check if the TV set has been powered on. Use TV remote to select AV signal for DVD rather than broadcast.

2.Check if the system connection is proper and secure.

3.Check if the connection cables are damaged.

4.Clean the disc.

1.Disc is damaged or dirty. Clean the disc or try another one.

2.Reset the color system of the TV set.

3.Make sure the DVD player is not connected through a VCR, cable or satellite dish.

1.Check if the TV and amplifier have been switched on and correctly set.

2.Check if the TV and amplifier system connections are secured.

3.Press AUDIO button to select other audio tracks of the disc.

4.Check if the MUTE function of the TV or amplifier has been activated.

5.There will be no sound output during REVERSE PLAY/PAUSE/SLOW and

SEARCH.

1.Make sure the POWER button on the unit has been turned on manually.

2.Remove the obstacles between the remote control and the player.

3.Point the remote control towards the remote sensor on the player.

4.Check if the batteries of the remote control have been loaded with correct polarities.

5.Replace the batteries of the remote control.

Power consumption	< 9.8W
Signal system	NTSC / PAL
Video output	1+0.2V (p-p), 75ohm, negative sync., 3.5 mm mini jack x1
Audio output	1.5 Vrms (1 KHz, 0dB),
	3.5 mm mini jack	x1
Earphone terminal	3.5mm stereo mini jack x2
Signal /Noise ratio(audio)	90dB typical
Dynamic range(audio)	90dB typical
Panel size	8.5 inch (16:9)
Resolution	1440 X 234 pixels
Laser	Wavelength 650 nm
Operating conditions	Temperature: 0 c	to 35 c. Operation status : Horizontal
Dimensions	225 x170x28 mm (main unit)
Weight	826g (main unit)

25% 50% 100% 150% 200% While at 100%, press the direction button to rotate the picture.

While at 150% or 200%, press the direction button to move the picture position. NOTE: The picture quality decreases as the picture size increases.

Search

Search Go to a desired section. (A desired Title, chapter, Time or Track)

.13.

	Press PLAY button to quit the STEP mode.
Multi-Angle/Subtitle/Audio
Angle	While playing a DVD disc, press ANGLE button to view different camera angles on the disc.
	A DVD disc may contain up to 9 selectable camera angles.

Sub- While playing a DVD disc, press Sub-Title button to select the language of the viewable subtitle.
Title	A DVD disc may contain up to 32 selectable subtitles.
	.14.

desired track.				FILE 004	4
		DIR 004	4
e. Repeat Step above to select the tracks you wish to play.		DIR 005	5	FILE 005	5
f. Press PLAY to start playing the programmed tracks.
For your reference:
To cancel the incorrect input information, press the Clear button.
For MP3 mode, press right direction button to cancel unwanted selection.
Press Program again to quit the program menu.
Under program playing, press the Program to resume normal playback.
NOTE:	Some discs do not allow program setting.
.15.

The TV system for North America is NTSC. Auto should only be used if you have a Multi-System TV.

Audio Setup

Press the Direction keys to highlight the desired Audio item.

Item	Instruction	Default setting
Digital Out	To select the digital output from:	SPDIF/RAW
	SPDIF/PCM; SPDIF/RAW; OFF

NOTE:

When Digital Out is NOT in use, it is recommended to turn OFF the digital output setting, for the purpose of minimizing the circuit interference.

.16.

.17.

Malfunction	Should the player develop a malfunction, unplug the player for 30 minutes. After
	that, power on the player and the restore function should reset the player.

.18.

.19.