Using the Battery Pack (DC)

GETTING STARTED

Using the Battery Pack (DC)

The rechargeable battery pack can be used for approximately 300 charge-cycles without any noticeable change in performance.

The battery should be charged fully (minimum 4 hours) before its initial use to ensure optimum lifetime performance.

To install the battery pack:

1.Place the battery pack into it’s cradle

located on the bottom of the player.

2. Slide the battery in until it clicks into place..

3. To release the battery, press the battery release button and slide the battery out.

To charge the battery pack:

1.Install the battery in the manner de- scribed above.

2.Connect the player’s DC-In jack to an AC

power source with the AC/DC adapter as described previously. (The Battery Charge indicator will light red while it is charging; it will light green when the bat-

tery is fully charged.)

Li-ion Polymer Rechargeable Battery Pack

 

When the battery charge level is

7.4V 3000mA/h

low, the unit will enter STANDBY

 

mode automatically.

 

Power Management

If the player will not be in use for a long period of time, set the Power Switch to the OFF position, remove the battery, and unplug the player.

Page 16

Coby Electronics Corporation

 

 

Page 16
Image 16
COBY electronic TF-DVD8501 Li-ion Polymer Rechargeable Battery Pack, 7.4V 3000mA/h, Using the Battery Pack DC, Page