COBY electronic TF-TV1901 Getting Started, Cable Connections, Choose one of 3 connections

GETTING STARTED

Cable Connections

Do not connect the power until the first 3 connections have been made.

1.Connect TV RF sources to the coaxial TV antenna jack. TV RF sources may include: Over- the-Air receiving antennas or cable lines. You can use a 75 ohm coaxial cable to connect an outdoor antenna.

2.Connect Audio sources to the RCA Stereo Input jacks. Audio sources may include: DVD players, VCRs, or camcorders. Match the red and white ends of the RCA AV cable to the Red “L” and White “R” jacks on the rear panel of the TV.

3.Connect video sources to the Video Input jacks. Video sources may include: DVD palyers, VCRs, or camcorders.

Choose one of 3 connections:

•Composite Video (standard quality). Match the yellow end of the RCA AV cable to the yellow Video jack on the rear panel of the TV .

•S-Video (better quality). If the video source has an S- Video output jack, use an S-Video cable to connect to the S-Video input jack on the rear panel of the TV.

•Component Video (best quality). Use the component video connection for high-definition video. If the video source has component video output jacks, use compo- nent video cables to connect them to the component video input jacks on the rear panel of the TV.

4.Insert one end of the AC power cord to the Power input jack on the rear panel of the TV and the other end to an AC 100-240V wall outlet.

i t

TV Antenna

(Cable Line, Antenna)

External Video Source

(DVD, VCR, Cable Box)

10