DETAILED INSTALLATION | 6 |
III. Front Panel Control Functions
1.The INPUT SELECTOR control selects the source which will be presented to the outputs and balanced outputs.
2.The RECORD SELECTOR control selects the source which will be presented to the record output. Because of the independent controls, one source may be monitored while a second, different source is being recorded.
3.The BALANCE control works by attenuating the right channel when being rotated from the detent in the counterclockwise direction, and conversely, the left channel for clockwise rotation.
The element is conductive plastic. Adjustment is continuously adjustable allowing for infinitesimal adjustments to match channel gain, which is impossible with stepped controls.
4.The OUTPUT LEVEL control is a precision tracking, audio taper, conductive plastic potentiometer used to adjust the voltage level at the outputs and balanced outputs. Clockwise rotation, of course, increases output.
1 | 2 | 3 | 4 |
INPUT SELECTOR | RECORD SELECTOR | BALANCE | OUTPUT LEVEL |
BALANCED DISC
UNBALANCED DISC
TUNER
VIDEO
RECORDER
RECORDER OFF
VIDEO
TUNER
UNBALANCED DISC
BALANCED DISC
FET PREAMPLIFIER 02b
Select a source with the INPUT SELECTOR switch and advance the OUTPUT LEVEL control to the level you wish. Keep in mind that your input sources will vary in level which can, when switching from one input to another, abruptly yield uncomfortable sound pressure.
Note: If a power interruption occurs to the system, reduce the OUTPUT LEVEL control gain. The resumption of power will cause no noise pulses in the FET PREAMPLIFIER 02b. However, some sources may produce high output voltages on turn on, which may cause damage to an amplifier or speakers .