Cognitive Solutions C SERIES The output from the self test is described in the table below.

105-169-03

The output from the self test is described in the table below.

Setting Description Example (Actual settings may vary

from examples listed below)

FW Firmware version and date FW: 195-170-140 V1.40

S/N Printer serial number S/N: P012345678

RAM, FLASH RAM and FLASH size RAM=16 MB, FLASH=8 MB

Inches Printed Total inches printed Inches Printed: 2911

Printhead Printhead Designation Printhead: KPC108_8T0A1

Printer Settings

Aux. Power Enable 5vdc output through Serial port. Aux. Power: OFF

Buffer Reset (1/10sec) Enables or disables the buffer reset timer. Buffer Reset (1/10sec): 65535

Comm Communications port configuration values

(Baud, Parity, Data Bits, Stop Bit s) Comm: 9600,N,8,1,OFF

Darkness Darkness setting of printer. First number is

factory setting (not user modifiable).

Second number is the variable, user

modifiable setting.

Darkness: 0 (0)

Energy Offset Adjusts the Energy Density. Energy Offset: 0 (0)

Feed Speed Speed at which media is fed using t he

FEED button. Feed Speed : NORMAL

Index Enabled Current state of Indexing. Either ena bled

or disabled (No Index). Index Enabled

Feed Type Current Indexing mode. GAP, BAR or

Notch. Feed Type: GAP

DTBAR Index sensor settings for Black Bar

indexing in Direct Thermal print mode. DTBAR: R=56 T=13 G=0

TTBAR Index sensor settings for Black Bar

indexing in Thermal Transfer print mode. TTBAR: R=50 T=15 G=0

DTGAP Index sensor settings for Gap indexing in

Direct Thermal print mode. DTGAP: R=1 T=16 G=0

TTGAP Index sensor settings for Gap indexing in

Thermal Transfer print mode. TTGAP: R=1 T=40 G=0

DTNOTCH Index sensor settings for Notch indexing in

Direct Thermal print mode. DTNOTCH: R=20 T=5 G=0

TTNOTCH Index sensor settings for Notch indexing in

Thermal Transfer print mode. TTNOTCH: R=50 T=1 G=0

No Media (inches) Distance (in inches) the label trave ls

before the printer either attempts to

recalibrate, or errors out with a red ready

light. (Gap indexing mode only )

No Media (inches): 1

Pitch (dots) Print density in dots per inch Pitch (dots): 200

Present Label When ON, Printer will advance and

reverse the distance specified be low for Present Label: ON