DURANGOTM 15’ X 10’ MODEL 2000000143
STITCH LINE
Before you begin
Read all instructions before set up.
•Select a level campsite clear of rocks, branches, and other hard or sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
•Do not set up your tent under trees.
•For best results in windy conditions, position end of tent into the wind.
•Enlist the help of at least one other person to assist you when it is time to assemble the tent.
Parts and Components
Description | Part Number |
Main Poles, Black (2) | |
Side Pole, Gray (1) | |
Roof Ridge Pole, Black (1) | |
Rainfly Pole, Black (1) | |
Rainfly |
To Set Up Tent
1.Unfold tent and spread out on a clean, level surface with the door facing the desired direction. Unzip door.
2. Stretch out corners and sides of tent. Secure with stakes driven in at an angle to better anchor the tent. (Fig. 1 & 2) Note: Staking the corners and sides will make it easier to raise and
Fig. 1 |
| Fig. 2 |
|
|
|
3. Assemble roof ridge pole
4. Place one end of roof ridge pole in brass grommet. Carefully apply pressure on pole to allow other end of pole to bow and be inserted into other brass grommet. (Fig. 3 & 4)
Fig. 3 |
| Fig. 4 |
|
|
|
5. Assemble the 2 long, black
Fig. 5
6. Assemble gray,
Fig. 6
7.Insert one end of each black pole into pins located on the ring in center location at the back of the tent. (Fig. 7)
8.Insert other end of black poles into pins at front corners of tent; and end of gray pole into pins on sides of tent to form arches as
shown. (Fig. 8) | Fig. 7 |
Gray
PoleGray
Pole
First |
| Second |
Black Pole | Fig. 8 | Black Pole |
9.Attach frame clips along tent seams to gray side pole and both black poles. (Fig. 9 & 10)
Fig. 9 |
| Fig. 10 |
|
|
|
|
|
|
|
|
|
To Attach Rainfly
1.Drape rainfly over tent. Make sure end with logo is centered over the door and the rainfly seams are centered over the
gray and black poles. (Fig. 11)
(continued on
other side)
